| 基于单片机的低压脉冲发生器研制 |
| |
| 引用本文： | 许珉,郑文棋.基于单片机的低压脉冲发生器研制[J].电力自动化设备,2009,29(3). |
| |
| 作者姓名： | 许珉 郑文棋 |
| |
| 作者单位： | 郑州大学,电气工程学院,河南,郑州,450001 |
| |
| 摘 要： | 阐述了一种基于单片机控制的,用于电力电缆短路和断线故障测距的低压脉冲发生器.利用单片机的I/O口产生一定宽度和频率的脉冲,用此脉冲控制触发电路,产生相应宽度和频率的触发脉冲,此触发脉冲又触发具有快速开断性能的MOSFET产生相应的脉冲,通过脉冲变压器耦合输出到测试电缆上.所实现的低压脉冲发生器的脉冲宽度和周期可通过编程调节.该低压脉冲发生器的最窄脉冲宽度较小,可达到0.14μs;频率采用常用的100 Hz,也可灵活调整;电压幅值可达300 V以上,可根据不同情况调整电压幅值,以便检测不同长度的电缆;阻抗可调节,以匹配不同性能的电缆.
|
| 关 键 词： | 脉冲发生器 电缆故障测距 单片机 可编程 低压脉冲法 |
Development of low voltage pulse generator based on MCU |
| |
| XU Min,ZHENG Wenqi.Development of low voltage pulse generator based on MCU[J].Electric Power Automation Equipment,2009,29(3). |
| |
| Authors: | XU Min ZHENG Wenqi |
| |
| Affiliation: | Zhengzhou University;Zhengzhou 450001;China |
| |
| Abstract: | A low voltage pulse generator controlled by MCU is developed to detect and locate the short-and open-circuit faults of power cables. The pulse of specified width and frequency is generated from the I/O ports of MCU to control the trigger circuit for generating trigger pulse of corresponding width and frequency,which is then input to MOSFET with fast-switching performance to generate corresponding test pulse,exerting on the power cable to be detected via pulse transformer. The pulse width and frequency can b... |
| |
| Keywords: | pulse generator power cable fault locating singlechip programmable low voltage pulse |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《电力自动化设备》浏览原始摘要信息 |
|
点击此处可从《电力自动化设备》下载全文 |
|
