| FDM自适应分层层厚范围研究 |
| |
| 引用本文： | 孙建平,曹志清,张爱军. FDM自适应分层层厚范围研究[J]. 机械设计与制造, 2006, 0(12): 29-30 |
| |
| 作者姓名： | 孙建平 曹志清 张爱军 |
| |
| 作者单位： | 1. 北京化工大学,机电工程学院,北京,100029
2. 北京化工大学,机电工程学院,北京,100029;中国科学院,遥感应用研究所开放实验室,北京,100101 |
| |
| 摘 要： | 快速成型自适应分层依据三维CAD模型的边界曲率变化率,确定其分层的厚度。受FDM实际加工设备的限制,其分层厚度应在一定的数值范围内。目前自适应分层层厚范围的确定都是通过实验测试给出的定值。提出了一种从理论上研究自适应分层层厚范围的确定方式。
|
| 关 键 词： | 自适应分层 层厚范围 |
| 文章编号： | 1001-3997(2006)12-0029-02 |
| 收稿时间： | 2006-04-08 |
| 修稿时间： | 2006-04-08 |
Research for layer thickness range in FDM adaptive slicing |
| |
| SUN Jian-ping,CAO Zhi-qing,ZHANG Ai-jun. Research for layer thickness range in FDM adaptive slicing[J]. Machinery Design & Manufacture, 2006, 0(12): 29-30 |
| |
| Authors: | SUN Jian-ping CAO Zhi-qing ZHANG Ai-jun |
| |
| Affiliation: | 1College of Mechanical adn Elcctrical Engineering, Beijing Univerity of Chemical Technology, Beijing 100029, China;2Laboratoly of Remote Sensing Information Science, lnsitute of Remote Sensing Applications, Chinese Academy of Science, Beijing 100101, China |
| |
| Abstract: | The adaptive slicing sets the layer thickness by the curvature change rate of three-dimensional CAD models.Because of the equipment limitation,these layer thickness should be in one range.At present,this range is detrmined by experimentation.This apper puts frward a theoretical way to determine the layer thickness range. |
| |
| Keywords: | FDM |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
