首页 | 本学科首页   官方微博 | 高级检索  
     

负载型杂多酸催化剂催化合成油酸正丁酯
引用本文:余新武,蔡传志,张路.负载型杂多酸催化剂催化合成油酸正丁酯[J].化学工业与工程技术,2006,27(1):33-35.
作者姓名:余新武  蔡传志  张路
作者单位:湖北师范学院,化学与环境工程系,湖北,黄石,435002
基金项目:湖北师范学院科研资助项目(2003B22),湖北师范学院创新团队资助项目。
摘    要:制备了以混合氧化物为载体的杂多酸盐催化剂HPA/TiO2MoO3,以油酸和正丁醇为原料,催化合成了油酸正丁酯。确定了该反应的优化条件:醇酸物质的量比2∶1,催化剂用量为反应物总质量的1%,反应时间60min,反应温度130℃以上,在此条件下,油酸正丁酯的酯化率可达98%。

关 键 词:负载型杂多酸  催化剂  合成  油酸正丁酯
文章编号:1006-7906(2006)01-0033-03
收稿时间:2005-08-01
修稿时间:2005年8月1日

Catalytic synthesis of n-butyl oleate by heteropolyacid supported onTiO2-MoO3
Yu Xinwu,Cai Chuanzhi,Zhang Lu.Catalytic synthesis of n-butyl oleate by heteropolyacid supported onTiO2-MoO3[J].Journal of Chemical Industry & Engineering,2006,27(1):33-35.
Authors:Yu Xinwu  Cai Chuanzhi  Zhang Lu
Abstract:The support heteropolyacid catalyst HPA/TiO_ 2-MoO_ 3 is prepared and used in synthesis of n-butyl oleate by oleatic acid and n-butyl alcohol. The effects on the yield of the product are discussed. The optimum conditions are obtained as follows: the molar ratio of n-butyl alcohol to oleatic acid is 2∶1, the amount of HPA/TiO_ 2-MoO_ 3 is 1.0% (based on total mass of reaction substances), the reaction time is 60min and the reaction temperature is over 130℃. Under the optimum conditions, the yield of the product can reach 98%.
Keywords:Support heteropolyacid  Catalysts  Synthesis  n-butyl oleate  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号