| 冷轧管机直流调速系统的节能改造 |
| |
| 引用本文： | 陈宏伟. 冷轧管机直流调速系统的节能改造[J]. 有色冶金节能, 2006, 23(4): 36-37 |
| |
| 作者姓名： | 陈宏伟 |
| |
| 作者单位： | 宝钛集团管棒厂,陕西,宝鸡,721014 |
| |
| 摘 要： | 将冷轧管机原来的直流接触器开关系统改为调速器，将原开环系统改为双闭环系统，去除能耗制动电阻等，串入电抗器，达到了明显的节能效果，并且设备的故障率大大降低。
|
| 关 键 词： | 节能 冷轧管机 改造 |
| 文章编号： | 1008-5122(2006)04-0036-02 |
| 收稿时间： | 2005-08-05 |
| 修稿时间： | 2005-08-05 |
Energy saving transformation of DC-governor system for cold rolling mills |
| |
| CHEN Hong-wei. Energy saving transformation of DC-governor system for cold rolling mills[J]. Energy Saving Of Non-Ferrous Metallurgy, 2006, 23(4): 36-37 |
| |
| Authors: | CHEN Hong-wei |
| |
| Affiliation: | CHEN Hong-wei |
| |
| Abstract: | BaoTi group company changed the imitate switch system to governor, open-circle system to double-loop system, put into reactance devices, removed energy braking resistor and so on. Achieved significant energy saving effects, and equipment breakdown rate was significantly reduced. |
| |
| Keywords: | engrgy saving cold rolling mills reformation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
