陶瓷颗粒表面的化学镀镍 |
| |
引用本文: | 何志亮,邢建东,高义民. 陶瓷颗粒表面的化学镀镍[J]. 铸造, 2003, 52(2): 101-104 |
| |
作者姓名: | 何志亮 邢建东 高义民 |
| |
作者单位: | 西安交通大学机械工程学院,陕西,西安,710049 |
| |
摘 要: | 研究了陶瓷颗粒表面化学镀镍的工艺,并着重讨论了施镀时间、装载比及施镀温度对镀速及镀层形貌的影响,从而确定了最佳工艺参数。扫描电镜分析结果表明通过采用恰当的工艺,陶瓷颗粒表面能够获得表面形貌较好且镀层厚度均匀的镍沉积层。
|
关 键 词: | 陶瓷颗粒 化学镀镍 Al2O3 耐热钢 复合材料 |
文章编号: | 1001-4977(2003)02-0101-04 |
修稿时间: | 2002-10-22 |
Electroless Plating Nickel on the Surface of Porcelain Grain |
| |
Abstract: | The technique of electroless plating nickel on the surface of porcelain grain has been investigated, the influences of the plating time, temperature and the load ratio on the plating rate and the surface condition of the coat are analyzed, then the optimum technique was determined. SEM analysis shows that, by this technique, the surface condition of the nickel film on the surface of porcelain grain is good and the thickness of the film is uniform. |
| |
Keywords: | porcelain grain electroless plating Nickel Al_2O_3 heet resisting steel composite |
本文献已被 CNKI 维普 万方数据 等数据库收录! |