首页 | 本学科首页   官方微博 | 高级检索  
     

二氧化氯催化氧化处理活性艳红染料废水催化剂的制备与应用
引用本文:王承涛,贺启环,贺鹏. 二氧化氯催化氧化处理活性艳红染料废水催化剂的制备与应用[J]. 工业催化, 2006, 14(6): 38-41
作者姓名:王承涛  贺启环  贺鹏
作者单位:南京理工大学化工学院,江苏 南京 210094
摘    要:研究了二氧化氯催化氧化用催化剂的制备条件与催化剂性能。实验结果表明,在工业催化剂载体上负载Cu2+活性组分的催化剂制备优化条件为:w(Cu2+)=6%,焙烧温度500 ℃,焙烧时间4 h。用此催化剂进行二氧化氯催化氧化处理COD为2 700 mg·L-1的活性艳红染料配制废水时,COD去除率达75%;催化剂寿命与再生实验表明,该方法在技术与经济上都具有较强实用性。

关 键 词:催化剂  二氧化氯  催化氧化  
活性艳红染料
  印染废水  
文章编号:1008-1143(2006)06-0038-04
收稿时间:2005-12-14
修稿时间:2005-12-14

Preparation and application of catalysts for treatment of wastewater containing reactive brilliant red X-3B via catalytic oxidation by chlorine dioxide
WANG Cheng-tao,HE Qi-huan,HE Peng. Preparation and application of catalysts for treatment of wastewater containing reactive brilliant red X-3B via catalytic oxidation by chlorine dioxide[J]. Industrial Catalysis, 2006, 14(6): 38-41
Authors:WANG Cheng-tao  HE Qi-huan  HE Peng
Affiliation:School of Chemistry Engineering, Nanjing University of Science & Technology, ;Nanjing 210094, Jiangsu,China
Abstract:The preparation and properties of the catalysts for chlorine dioxide (ClO2) catalytic oxidation were studied. Optimum preparation condition for supporting of Cu2+ active component was as follows: concentration of the impregnating solution=6%(w/w), calcination at 500 ℃ for 4 h. COD removal efficiency of over 75 % was attained over the catalyst for treatment of wastewater with COD of 2 700 mg·L-1. The catalyst service life and catalyst regeneration tests showed that ClO2 catalytic oxidation was a practical and efficient route for treatment of wastewater from dyestuff factory
Keywords:catalyst  chlorine dioxide(ClO_2)  catalytic oxidation  reactive brilliant red  wastewater
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《工业催化》浏览原始摘要信息
点击此处可从《工业催化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号