| 以风险与寿命为基准的承压设备设计与制造 |
| |
| 引用本文： | 陈学东,王冰,艾志斌,杨铁成,顾望平. 以风险与寿命为基准的承压设备设计与制造[J]. 压力容器, 2007, 24(10): 1-5 |
| |
| 作者姓名： | 陈学东 王冰 艾志斌 杨铁成 顾望平 |
| |
| 作者单位： | 合肥通用机械研究院国家压力容器与管道安全工程技术研究中心,安徽,合肥,230031 |
| |
| 基金项目： | 科技部国际合作项目;国家高技术研究发展计划(863计划);合肥通用机械研究院院所基金;国家支撑计划 |
| |
| 摘 要： | 在近五年国内RBI、RCM、SIL等工程风险分析技术手段应用基础上,分析了现行承压设备由于设计制造与使用服役相对脱离因而存在的不足,提出在国内重要承压设备设计制造环节早期应用相关工程风险分析方法,开展基于风险与寿命的设计制造(RBD)理念。并结合国内外的研究现状,提出了当前我国开展RBD研究设想建议。
|
| 关 键 词： | 工程风险 寿命 承压设备 设计 制造 |
| 文章编号： | 1001-4837（2007）10-0001-05 |
| 修稿时间： | 2007-09-20 |
Design and Manufacture of Pressure- bearing Equipment Based on Risk and Life |
| |
| CHEN Xue-dong,WANG Bing,AI Zhi-bin,YANG Tie-cheng,GU Wang-ping. Design and Manufacture of Pressure- bearing Equipment Based on Risk and Life[J]. Pressure Vessel Technology, 2007, 24(10): 1-5 |
| |
| Authors: | CHEN Xue-dong WANG Bing AI Zhi-bin YANG Tie-cheng GU Wang-ping |
| |
| Affiliation: | Hefei General Machinery Research Institute - National Technical Research Center on Safety Engineering of Pressure Vessels and Pipelines, Hefei 230031,China |
| |
| Abstract: | In this paper the shortcomings of existing pressure-bearing equipment due to relative separation of design and manufacture from service are analyzed based on application of such technical means for engineering risk analysis as RBI,RCM,SIL,etc.at home in recent five years,a concept is proposed that related methods for engineering risk analysis shall be applied at early stage of design and manufacture link of important pressure-bearing equipment at home to carry out risk and life-based design and manufacture(RBD).And suggestions about the conception for development RBD research in our country at present are proposed in combination of the present situation of research both at home and abroad. |
| |
| Keywords: | engineering risk life pressure-bearing equipment design manufacture |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
