| 直线—圆弧齿廓内齿轮副的齿形优化设计 |
| |
| 引用本文： | 路曼,王全先,方成龙.直线—圆弧齿廓内齿轮副的齿形优化设计[J].机械传动,2009,33(2). |
| |
| 作者姓名： | 路曼 王全先 方成龙 |
| |
| 作者单位： | 安徽工业大学,机械工程学院,安徽,马鞍山,243002 |
| |
| 基金项目： | 安徽省教育厅自然科学研究项目 |
| |
| 摘 要： | 圆弧齿廓外齿轮和直线齿廓内齿轮都可以通过磨削加工解决内齿轮副硬齿面的加工问题,用圆弧齿廓替代与直线齿廓内齿轮啮合的外齿轮齿廓会引起啮合传动误差,通过误差分析,提出了其误差计算公式,以该啮合传动误差为最小作为目标函数,对直线-圆弧齿廓内齿轮副齿形进行了优化设计,结果表明齿形误差仅为几微米.
|
| 关 键 词： | 内齿轮副 直线齿廓 优化设计 |
Optimal Design on the Rectilinear-arc Teeth Profile in Annular Gear Pair |
| |
| Lu Man,Wang Quanxian,Fang Chenglong.Optimal Design on the Rectilinear-arc Teeth Profile in Annular Gear Pair[J].Journal of Mechanical Transmission,2009,33(2). |
| |
| Authors: | Lu Man Wang Quanxian Fang Chenglong |
| |
| Abstract: | Arc outer gear and rectilinear teeth inner grinding for hard tooth-face of annular gear pair can make gear.It will cause the error of matching if arc teeth replace the outer gear of matching internal gear pair in rectilinear teeth profile,the calculating of the error will be inferred.The minima of the error of matching is taken for the objective function,and the teeth profile of rectilinear-arc teeth profile in annular gear pair is optimized,the error of teeth profile only is several micron. |
| |
| Keywords: | Internal gear pair Rectilinear teeth profile Optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
