首页 | 本学科首页   官方微博 | 高级检索  
     

基于消失模铸造的AZ91D镁合金振动改性研究
引用本文:李继强,樊自田,田学峰,董选普,王元庆.基于消失模铸造的AZ91D镁合金振动改性研究[J].特种铸造及有色合金,2006,26(9):581-583.
作者姓名:李继强  樊自田  田学峰  董选普  王元庆
作者单位:华中科技大学
摘    要:研究了机械振动处理技术对AZ91D镁合金在消失模铸造条件下组织形貌以及力学性能的影响,并探讨了振动细化机理。结果表明:机械振动能显著地细化AZ91D合金的铸态组织,改善其力学性能,提高其抗拉强度,当激振力为1.5kN时,合金抗拉强度最高,而当激振力进一步增加时,由于组织中出现微观缩松,强度有所降低。

关 键 词:消失模铸造  镁合金  机械振动  组织细化
文章编号:1001-2249(2006)09-0583-03
收稿时间:2006-06-16
修稿时间:2006年6月16日

Effects of Mechanical Vibration on Modification of AZ91D Magnesium Alloy in Lost Foam Casting
Li Jiqiang,Fan Zitian,Tian Xuefeng,Dong Xuanpu,Wang Yuanqing.Effects of Mechanical Vibration on Modification of AZ91D Magnesium Alloy in Lost Foam Casting[J].Special Casting & Nonferrous Alloys,2006,26(9):581-583.
Authors:Li Jiqiang  Fan Zitian  Tian Xuefeng  Dong Xuanpu  Wang Yuanqing
Abstract:Effects of mechanical vibration on microstructure and mechanical properties of AZ91D magnesium alloy in lost foam casting have been investigated, and its vibration refinement mechanism is understood. The results show that mechanical vibration can significantly refine the as-cast microstructure of the AZ91D magnesium alloy to improve the mechanical properties. The maximum tensile strength can be obtained with the vibrated force of 1.5 kN. With the further increase of the vibrated force, the tensile strength of the Mg alloy can be somewhat decreased arising from the formation of micro-porosity in the microstructure.
Keywords:Lost Foam Casting  Magnesium Alloy  Mechanical Properties  Microstructure Refinement
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号