| 0.5Mt/a重油催化裂化装置汽提段穿孔原因分析及对策 |
| |
| 引用本文： | 蒋云龙.0.5Mt/a重油催化裂化装置汽提段穿孔原因分析及对策[J].炼油技术与工程,2012,42(10):45-48. |
| |
| 作者姓名： | 蒋云龙 |
| |
| 作者单位： | 淮安清江石油化工有限责任公司,江苏省淮安市,223002 |
| |
| 摘 要： | 淮安清江石油化工有限责任公司0.5 Mt/a重油催化裂化装置再生系统的沉降器汽提段发生磨损腐蚀穿孔。通过对沉降器汽提段材料的表观、化学元素、设备安装高度和装置技术参数改进分析,认为穿孔是材料发生了磨损腐蚀(湍流腐蚀)、高温腐蚀和晶间腐蚀,造成这些腐蚀的主要因素是沉降器的安装高度偏低。并分析了沉降器汽提段穿孔形成过程,根本措施是通过技术改造,提高沉降器的安装高度;保守措施是原料轻质化、降低装置负荷和进行装置工艺条件优化。
|
| 关 键 词： | 重油催化裂化装置 汽提段 穿孔 对策 |
Analysis of failure of stripping section of a 500,000 TPY heavy oil FCCU and countermeasures |
| |
| Jiang Yunlong.Analysis of failure of stripping section of a 500,000 TPY heavy oil FCCU and countermeasures[J].Petroleum Refinery Engineering,2012,42(10):45-48. |
| |
| Authors: | Jiang Yunlong |
| |
| Affiliation: | Jiang Yunlong(Huai’an Qingjiang Petrochemical Co.,Ltd.,Huani’an,Jiangsu 223002) |
| |
| Abstract: | The construction of reactor and regenerator system and failure of stripping section of settler of a 500,000 TPY heavy oil FCCU in Huai＇an Qingjiang Petrochemical Co.,Ltd are discussed.The apparent analysis of materials in the stripping section of settler and construction analysis conclude that the failure was caused by erosion corrosion（turbulent flow corrosion）,high-temperature corrosion and intergranular corrosion because of lower installation elevation of settler.The process of corrosion failure of stripping section of settler is analyzed,and corresponding measures have been proposed,such as technical revamping to raise the installation elevation of settler,processing of lighter feedstocks,reduction of FCCU＇s capacity and optimization of process conditions. |
| |
| Keywords: | heavy oil FCCU stripping section failure countermeasure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
