| 聚合釜夹套筒体缩口的压制 |
| |
| 引用本文： | 孙勇,李晓巍,王荣梅.聚合釜夹套筒体缩口的压制[J].聚氯乙烯,2014(1):36-38. |
| |
| 作者姓名： | 孙勇 李晓巍 王荣梅 |
| |
| 作者单位： | 中航黎明锦西化工机械（集团）有限责任公司,辽宁葫芦岛125001 |
| |
| 摘 要： | 介绍了聚合釜夹套筒体的模具设计以及压制工艺。采用该技术不仅可以提高产品质量,还可以缩短生产周期。
|
| 关 键 词： | 夹套 聚合釜 缩口 压制 |
Pressed work of necking section of polymerizer jacket |
| |
| SUN Yong,LI Xiaowei,WANG Rongmei.Pressed work of necking section of polymerizer jacket[J].Polyvinyl Chloride,2014(1):36-38. |
| |
| Authors: | SUN Yong LI Xiaowei WANG Rongmei |
| |
| Affiliation: | (AVIC Liming Jinxi Chemical Mechinery (Group) Co. , Ltd. , Huludao 125001, China) |
| |
| Abstract: | The mold design and pressed work of polymerizer jacket barrel were introduced. This technology can not only improve the quality of products, but also shorten the production cycle. |
| |
| Keywords: | jacket polymerizer necking section pressed work |
| 本文献已被 CNKI 维普 等数据库收录！ |
