| 盲孔法测量精度的研究─—边界及孔间距的影响 |
| |
| 引用本文： | 裴怡,包亚峰,唐慕尧,黄兰林. 盲孔法测量精度的研究─—边界及孔间距的影响[J]. 焊接学报, 1994, 0(3) |
| |
| 作者姓名： | 裴怡 包亚峰 唐慕尧 黄兰林 |
| |
| 作者单位： | 西安交通大学 |
| |
| 摘 要： | 本文根据弹性力学柯西解及三维弹性有限元分析，对通孔及盲孔测量时，边界与孔中心距离和孔与孔间距问题进行了研究讨论，得到边界及孔间距是在一定范围内有影响的，孔与孔之间的影响与载荷方向有关，并且通过实验对其进行了验证。由此确定了误差小于２％～３％的横向最小间距ｄ＿（ｙｍｉｎ）（垂直于载荷）、纵向最小距Ｄ＿（ｘｍｉｎ）（平行于载荷方向）和孔与边界的最小距离ｄ＿（ｍｉｎ）。为盲孔测量获得比较可靠而又完整的应力数值提供了依据。
|
| 关 键 词： | 盲孔；精度；边界；孔间距 |
Effect of boundary and distance between holes on accuracy of blind hole technique |
| |
| Pei Yi,Bao Yafeng,Tang Muyao and Huang Lanlin. Effect of boundary and distance between holes on accuracy of blind hole technique[J]. Transactions of The China Welding Institution, 1994, 0(3) |
| |
| Authors: | Pei Yi Bao Yafeng Tang Muyao Huang Lanlin |
| |
| Affiliation: | Xi'an Jiaotong University |
| |
| Abstract: | In present paper,the effect of distance from boundary to hole centerand hole to hole on the accuracy of blind-hole technique are discussed on the basis ofKirsch elastic solusion and solusion of 3D.F.E. calculation.Analysis shows that theboundary and distance between holes have effects to a certain content and moreoverthe effect of distanee between holes is related to direction of loading.Experimentsverifred the obtained analytical conclusions. Finally,the transverse and longitudinalminimum distance between noles d_(ymin) and d_(xmin) and the minimum distance from holeto boundary d_(min) are detemined. It provides necessary basis for obtaining accurate andreliable stress value with blind-hole method. |
| |
| Keywords: | blind-hole accuracy boundary distance between holes |
| 本文献已被 CNKI 等数据库收录！ |
