Film-forming Characteristics of Grease in Point Contact under Swaying Motions

The technique of relative optical interference intensity (ROII) and simple numerical calculations were used to investigate the lubricating behavior of grease lubricant films in the rolling direction under swaying motions (acceleration/deceleration). Experimental results indicate that at a same entrainment velocity of the inlet, the central film thickness under deceleration is larger than that under acceleration. The minimum central film thickness in one swaying cycle does not occur at the moment of zero entrainment, but at the initial period of acceleration. At the moment of zero entrainment, the central film is thicker than its peripheries, and the value of the central film thickness increases with increases in the changing rate of the entrainment velocity. It is thought that the transient behaviors of the grease lubricant film deviate from those in steady state conditions. The profiles of the transient film thickness and the approximate thicknesses of elastohydrodynamic contact in the rolling direction calculated by using a simple numerical method are supported by the experimental results. The numerical method can also be used to explain the behavior of the grease lubricating film under non-steady state conditions. An erratum to this article can be found at