| 硬质合金电火花加工性能的试验研究 |
| |
| 引用本文： | 张高萍,郭光宜,赵灵. 硬质合金电火花加工性能的试验研究[J]. 现代制造工程, 2011, 0(8) |
| |
| 作者姓名： | 张高萍 郭光宜 赵灵 |
| |
| 作者单位： | 南通职业大学,南通,226007 |
| |
| 基金项目： | 南通市科技计划项目(K2007005) |
| |
| 摘 要： | 通过试验研究硬质合金的电火花加工中脉冲宽度、峰值电流等电参数对加工速度、电极损耗、加工表面粗糙度的影响规律,得出结论:脉冲宽度和峰值电流必须在一个合适的范围内才能得到较好的加工效果。
|
| 关 键 词： | 硬质合金 电火花加工 脉冲宽度 峰值电流 |
Experimental research on EDM performance of carbide |
| |
| ZHANG Gao-ping,GUO Guang-yi,ZHAO Ling. Experimental research on EDM performance of carbide[J]. Modern Manufacturing Engineering, 2011, 0(8) |
| |
| Authors: | ZHANG Gao-ping GUO Guang-yi ZHAO Ling |
| |
| Affiliation: | ZHANG Gao-ping,GUO Guang-yi,ZHAO Ling(Nantong Vocational College,Nantong 226007,Jiangsu,China) |
| |
| Abstract: | Based on the experiment of EDM for carbide material,the influences of electric parameters,such as pulse width and peak value of current,on the processing speed,electrode wear and machined surface roughness,are researched.The examined and investigated results show the better effect is obtained by choosing suitable pulse width and peak value of current. |
| |
| Keywords: | cemented carbide Electrical Discharge Machining(EDM) pulse width peak value of current |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
