|
|||||
|
|
| 超高速磨削切屑去除机理的分子动力学仿真研究 | |
| 引用本文： | 高兴军,赵恒华,邹平,刘峰.超高速磨削切屑去除机理的分子动力学仿真研究[J].现代制造工程,2011(8). |
| 作者姓名： | 高兴军 赵恒华 邹平 刘峰 |
| 作者单位： | 1. 辽宁石油化工大学机械工程学院,抚顺113001;东北大学机械工程与自动化学院,沈阳110819 2. 辽宁石油化工大学机械工程学院,抚顺,113001 3. 东北大学机械工程与自动化学院,沈阳,110819 |
| 基金项目： | 国家自然科学基金项目(50570381); 辽宁省自然科学基金项目(20102067); 辽宁省重点实验室基金资助项目(20060276) |
| 摘 要： | 利用分子动力学建立了超高速磨削的物理模型和数学模型,模型包括边界原子层、牛顿原子层和恒温原子层。运用Tersoff势函数对磨粒原子和工件原子之间的相互作用力进行计算。建立了模拟的运动方程,对其进行数值求解,从而获得工件原子变化后的位移和速度。模拟了不同磨削深度下切屑的形成情况。讨论磨削深度对切屑形成过程的影响,研究了超高速磨削冲击成屑的机理。 |
| 关 键 词： | 超高速磨削 分子动力学 切屑去除机理 |
Study on mechanism for chip removal by molecular dynamics simulation in ultra-high speed grinding |
|
| GAO Xing-jun,ZHAO Heng-hua,ZOU Ping,LIU Feng.Study on mechanism for chip removal by molecular dynamics simulation in ultra-high speed grinding[J].Modern Manufacturing Engineering,2011(8). | |
| Authors: | GAO Xing-jun ZHAO Heng-hua ZOU Ping LIU Feng |
| Affiliation: | GAO Xing-jun1,2,ZHAO Heng-hua1,ZOU Ping2,LIU Feng1,2(1 School of Mechanical Engineering,Liaoning Shihua University,Fushun 113001,Liaoning,China,2 School of Mechanical Engineering & Automation,Northeastern University,Shenyang 110819,China) |
| Abstract: | The physics models and mathematics models of molecular dynamics simulation in ultra-high speed grinding are built up.The models are consisted of the boundary atom,Newton's atom and the constant temperature atom.The interaction between the grinding grain particles and workpiece particles is computed by the Tersoff empirical potential function.The equation of motion is built up.It is solved by numerical value and the speed and displacement of these particles are obtained.Finally the motion track of them in th... |
| Keywords: | ultra-high speed grinding molecular dynamics mechanism for chip removal |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |