| 尖晶石型LiMn2O4的水热合成及其锂吸附性能 |
| |
| 引用本文： | 孙淑英,张钦辉,于建国.尖晶石型LiMn2O4的水热合成及其锂吸附性能[J].过程工程学报,2010,10(1):185-189. |
| |
| 作者姓名： | 孙淑英 张钦辉 于建国 |
| |
| 作者单位： | 华东理工大学化学工程联合国家重点实验室 华东理工大学化学工程联合国家重点实验室 华东理工大学盐湖工业技术研究中心 |
| |
| 基金项目： | 国家自然科学基金资助项目(编号:20906022);;上海市科委纳米专项基金资助项目(编号:0852nm021) |
| |
| 摘 要： | 以Mn(NO3)2, LiOH和H2O2为原料，通过控制水热反应条件直接合成了尖晶石型LiMn2O4纳米线，经酸浸脱锂后得到对Li+具有特殊选择性吸附的离子筛. 用XRD, HRTEM, SAED和共存金属离子的分配系数等手段对产物的晶相结构及吸附性能进行了研究. 结果表明，水热反应条件对前驱体结构有较大影响，前驱体LiMn2O4和离子筛MnO2均为一维纳米线，离子筛对不同金属离子的选择性吸附顺序为Li+>>Ca2+>Mg2+>Na+>K+，说明离子筛具有较高的Li+选择性. Li+的分配系数为16770.63 mL/g，是高温焙烧样品(7917.49 mL/g)的2.12倍，表明一维纳米MnO2离子筛对Li+的选择性吸附性能有显著提高.
|
| 关 键 词： | 水热合成 离子筛 LiMn2O4 吸附 锂 |
| 收稿时间： | 2009-10-23 |
| 修稿时间： | 2009-12-24 |
Hydrothermal Synthesis and Lithium Adsorption Properties of LiMn_2O_4 Spinel |
| |
| SUN Shu-ying,ZHANG Qin-hui,YU Jian-guo.Hydrothermal Synthesis and Lithium Adsorption Properties of LiMn_2O_4 Spinel[J].Chinese Journal of Process Engineering,2010,10(1):185-189. |
| |
| Authors: | SUN Shu-ying ZHANG Qin-hui YU Jian-guo |
| |
| Affiliation: | State-Key Laboratory of Chemical Engineering, East China University of Science and Technology State-Key Laboratory of Chemical Engineering, East China University of Science and Technology Engineering Laboratory of Salt Lake，East China University of Science and Technology |
| |
| Abstract: | Spinel-type ternary LiMn2O4 nanowires were synthesized via direct hydrothermal synthesis with Mn(NO3)2, LiOH and H2O2. The final low-dimensional MnO2 nanorod ion-sieve with selective adsorption property to lithium ion was prepared and further modified by acid treatment to completely extract lithium ions from the Li-Mn-O lattice. The effects of hydrothermal reaction conditions on the nanostructure, chemical stability and ion-exchange property of the LiMn2O4 precursor and MnO2 ion-sieve were systematically ex... |
| |
| Keywords: | hydrothermal synthesis ion-sieve LiMn2O4 adsorption lithium |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《过程工程学报》浏览原始摘要信息 |
|
点击此处可从《过程工程学报》下载全文 |
