| 基于T-S模糊模型的棒磨机给料优化决策 |
| |
| 引用本文： | 侯恩广,李力争,郑维学,王力为.基于T-S模糊模型的棒磨机给料优化决策[J].矿业研究与开发,2007,27(4):35-36,86. |
| |
| 作者姓名： | 侯恩广 李力争 郑维学 王力为 |
| |
| 作者单位： | 中南大学,信息科学与工程学院,湖南,长沙,410083 |
| |
| 摘 要： | 针对磨矿过程中棒磨机时常出现不饱或胀肚,从而影响生产效率这一问题,提出了一种基于T-S模糊模型的棒磨机给料优化决策方法。根据棒磨工艺流程和操作经验,以棒磨机实际给料量及其与棒磨后的筛下给矿料的比较值作为前件,建立了一个棒磨机给料的非齐次T-S优化决策模糊模型。仿真结果表明,应用这一方法可使棒磨机给料量达到最优值。
|
| 关 键 词： | 棒磨机 给料量 T-S模糊模型 优化决策 |
| 文章编号： | 1005-2763（2007）04-0035-02 |
| 修稿时间： | 2006-07-27 |
Optimized Feeding Decision-making for Rod Mill based on T-S Fuzzy Model |
| |
| Hou Enguang,Li Lizheng,Zheng Weixue,Wang Liwei.Optimized Feeding Decision-making for Rod Mill based on T-S Fuzzy Model[J].Mining Research and Development,2007,27(4):35-36,86. |
| |
| Authors: | Hou Enguang Li Lizheng Zheng Weixue Wang Liwei |
| |
| Affiliation: | School of Information Science and Engineering, Central South University, Changsha, Hunan 410083 ,China |
| |
| Abstract: | Aim at the problems of short or over feeding often occurring in the process of grinding,that influence the productive efficiency,An optimized feeding decision-making method for rod mill based on T-S fuzzy mode is put forward.According to the technical process of grinding and some practice experiences from the operation,using the practical flux of ore feeding for rod mill,and the difference between the practical flux of ore feeding and the flux of undersize screen feeding as the premises of fuzzy rules,a non-homogeneous T-S fuzzy mode for optimized feeding decision-making of rod mill was built.The results of simulation showed that the flux of ore feeding for rod mill can achieve optimization by use of this method. |
| |
| Keywords: | Rod mill Feed flux T-S fuzzy model Optimized decision-making |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《矿业研究与开发》浏览原始摘要信息 |
|
点击此处可从《矿业研究与开发》下载全文 |
|
