| 高速走丝电火花线切割多次切割研究 |
| |
| 引用本文： | 郭钟宁,刘志东. 高速走丝电火花线切割多次切割研究[J]. 广东工业大学学报, 1991, 0(1) |
| |
| 作者姓名： | 郭钟宁 刘志东 |
| |
| 作者单位： | 广东工学院机工系，南京航空学院 |
| |
| 摘 要： | 通过研究高速走丝电火花线切割机床电极丝动态特性对多次切割的影响,分析了干扰电极丝动态稳定性的各种不利因素。多次切割结果表明,在具备一定传动精度和辅助设施如恒张力、限幅器等改进型机床上,采用适当的切割工艺,多次切割是完全可行的。
|
| 关 键 词： | 高速走丝 电火花 多次切割 |
The Research on the Multiple Cut in WEDM-HS |
| |
| Guo Zongning. The Research on the Multiple Cut in WEDM-HS[J]. Journal of Guangdong University of Technology, 1991, 0(1) |
| |
| Authors: | Guo Zongning |
| |
| Abstract: | By studying the effects of the wire dynamic stability of WEDM-HS (Wire cut Electric Discharge Machine with High travelling Speed) on the state of multiple cut machining, the author comprehensively analysed the unfavourable factors affecting on wire dynamic stability. After some improvement measures taken in the expeiment the multiple cut results show that, by using suitable cutting technologie, smultiple cut is feasible on the machine with high precision and other supplementary equipments such as guide, wire tension unit, etc. |
| |
| Keywords: | high travelling speed of wire electric discharge multiple cut. |
| 本文献已被 CNKI 等数据库收录！ |
|
