| 采用UG、HyperMesh和ANSYS的齿轮轴模态分析 |
| |
| 引用本文： | 舒彪,喻道远,王灯,张三强. 采用UG、HyperMesh和ANSYS的齿轮轴模态分析[J]. 现代制造工程, 2012, 0(2): 71-73,121 |
| |
| 作者姓名： | 舒彪 喻道远 王灯 张三强 |
| |
| 作者单位： | 华中科技大学数字制造装备与技术国家重点实验室,武汉,430074 |
| |
| 摘 要： | 借助UG强大的几何建模功能、HyperMesh强大的网格划分能力以及ANSYS的有限元分析功能,采用将三者结合的分析方法,对齿轮轴进行模态分析,得出了其低阶固有频率和振型,对正确合理地设计齿轮轴结构具有理论意义.
|
| 关 键 词： | ANSYS软件 HyperMesh软件 UG软件 齿轮轴 模态分析 |
Model analysis of gear shaft based on UG, HyperMesh and ANSYS |
| |
| Shu Biao , Yu Daoyuan , Wang Deng , Zhang Sanqiang. Model analysis of gear shaft based on UG, HyperMesh and ANSYS[J]. Modern Manufacturing Engineering, 2012, 0(2): 71-73,121 |
| |
| Authors: | Shu Biao Yu Daoyuan Wang Deng Zhang Sanqiang |
| |
| Affiliation: | (State Key Laboratory of Digital Manufacturing Equipment & Technology,Huazhong University of Science & Technology,Wuhan 430074,China) |
| |
| Abstract: | The powerful modeling function of UG,meshing function of HyperMesh and definite element analysis function of ANSYS have been fully used based on the integration of those three software to perform the model analysis of gear shaft to obtain its low-order natural frequencies and vibration mode which provides a theoretical basis for designing gear shaft accurately and reasonably. |
| |
| Keywords: | ANSYS HyperMesh UG gear shaft model analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
