| 冰箱压缩机后罩拉伸模设计 |
| |
| 引用本文： | 刘颂文.冰箱压缩机后罩拉伸模设计[J].模具工业,2001(4):10-14. |
| |
| 作者姓名： | 刘颂文 |
| |
| 作者单位： | 科龙电器股份有限公司 |
| |
| 摘 要： | 介绍了冰箱压缩机后罩的成形工艺 ,设计了1副拉伸与冲孔结合的复合模 ,并对关键零件的制造作了详细介绍 ,取得了较好的经济效益
|
| 关 键 词： | 压缩机后罩 拉伸模 工艺 |
| 修稿时间： | 2000年10月19 |
Design of the Drawing Die for the Back Cover of the Refrigerator Compressor |
| |
| Liu Songwen.Design of the Drawing Die for the Back Cover of the Refrigerator Compressor[J].Die & Mould Industry,2001(4):10-14. |
| |
| Authors: | Liu Songwen |
| |
| Affiliation: | Liu Songwen |
| |
| Abstract: | The forming process for the back cover of the refrigerator compressor was introduced. A compound die combining drawing and piercing together was designed. And a detailed introduction was made on the manufacture of the key parts of the die. The economic benefit is good. |
| |
| Keywords: | compressor cover drawing die technological process |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
