| 气压瓶盖注射模具设计 |
| |
| 引用本文： | 张建宇,张南,刘志民. 气压瓶盖注射模具设计[J]. 电加工与模具, 2006, 0(Z1): 38-39,42 |
| |
| 作者姓名： | 张建宇 张南 刘志民 |
| |
| 作者单位： | 1. 河北工程学院机电学院,河北邯郸,056038
2. 邯郸职业技术学院机电系,河北邯郸,056001 |
| |
| 摘 要： | 分析了气压瓶盖的结构及工艺特点,介绍了瓶盖注射模具的结构和工作过程,并详细介绍了模具浇注系统,凸凹模及侧向分型与抽芯机构的设计.
|
| 关 键 词： | 气压瓶盖 注射模具 侧向分型 抽芯机构 |
| 修稿时间： | 2005-09-21 |
Design of the Injection Mould for the Lid of Atmospheric Pressure Bottle |
| |
| Zhang Jianyu,Zhang Nan,Liu Zhimin. Design of the Injection Mould for the Lid of Atmospheric Pressure Bottle[J]. Electromachining & Mould, 2006, 0(Z1): 38-39,42 |
| |
| Authors: | Zhang Jianyu Zhang Nan Liu Zhimin |
| |
| Abstract: | The technologic characteristics of the lid of the atmospheric bottle were analyzed.The structure and the working process of the injection mould for the lid were stated.And the design of the feed system,cavity and core,side parting and core-pulling mechanism were stated in detail. |
| |
| Keywords: | atmospheric pressure bottle Lid injection mould side parting corepulling mechanism |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
