Fracture behavior of stitched warp-knit fabric composites |
| |
Authors: | FG Yuan S Yang |
| |
Affiliation: | (1) Department of Mechanical and Aerospace Engineering, North Carolina State University, Raleigh, NC 27695-7910, USA |
| |
Abstract: | Pilot studies are conducted to characterize the macroscopic fracture resistance behavior using linear elastic fracture mechanics and attempt to quantify the fracture parameters in which may govern the fracture and failure patterns of stitched warp-knit fabric composites. Methods based on the J-integral method and Betti's reciprocal theorem in extracting the fracture parameters, critical stress intensity factors, T-stress, and the second term of y(r,0) near the crack tip prior to fracture initiation are formulated. Two fracture criteria, c,r
c] and c,r
c] are attempted to characterize the failure initiation for the fiber-dominated failure mode and self-similar crack extension in a given thickness of the laminate. Based on linear elastic fracture mechanics principle, these criteria are transformed into crack-driving forces K
Q,T] and K
Q,g
32]. The two-parameter fracture criteria, K
Q,T] and K
Q,g
32] provide a good correlation for the CCT and SENT specimens, but not for the high constraint CT specimens. With the limited experimental data, the results tend to show that the large tensile T-stress and large magnitude of negative g
32 may inhibit the crack extension in the same crack plane and promote crack kinking. |
| |
Keywords: | Betti's reciprocal theorem crack turning J-integral linear elastic fracture mechanics stress intensity factors T-stress |
本文献已被 SpringerLink 等数据库收录! |
|