首页 | 本学科首页   官方微博 | 高级检索  
     

交联聚乙烯滚塑容器专用料的研制
引用本文:张桂云,余静清,鲁 红,葛建芳.交联聚乙烯滚塑容器专用料的研制[J].包装工程,2011,32(7):58-61.
作者姓名:张桂云  余静清  鲁 红  葛建芳
作者单位:仲恺农业工程学院,广州,510225;仲恺农业工程学院,广州,510225;仲恺农业工程学院,广州,510225;仲恺农业工程学院,广州,510225
摘    要:采用过氧化物交联方法研究了交联聚乙烯的工艺条件和性能,探讨了交联反应对交联聚乙烯力学性能和交联度的影响,并用差示扫描量热仪表征了交联聚乙烯的熔融行为。结果表明:交联剂双2,5用量(质量分数)为1.5%,交联温度为180℃,交联时间为5 min时,交联聚乙烯的交联度达到74.2%,拉伸强度为29.0MPa,断裂伸长率为480%,其熔融峰温度为108.7℃。

关 键 词:聚乙烯  过氧化物  交联度
收稿时间:2010/12/28 0:00:00
修稿时间:2011/4/10 0:00:00

Development of Crosslinking Polyethylene for Rotational Moulding Container
ZHANG Gui-yun,YU Jing-qing,LU Hong and GE Jian-fang.Development of Crosslinking Polyethylene for Rotational Moulding Container[J].Packaging Engineering,2011,32(7):58-61.
Authors:ZHANG Gui-yun  YU Jing-qing  LU Hong and GE Jian-fang
Affiliation:ZHANG Gui-yun,YU Jing-qing,LU Hong,GE Jian-fang(Zhongkai University of Agriculture and Engineering,Guangzhou 510225,China)
Abstract:Process conditions and properties of crosslinking polyethylene were studied by peroxide crosslinking method.Effect of the crosslinking reaction on mechanical properties and crosslinking degree of the crosslinking polyethylene was discussed.Melting behavior of the crosslinking polyethylene was characterized by DSC.The result showed that when crosslinking agent double 2,5 is 1.5%,reaction temperature is 180 ℃,reaction time is 5 minutes,the crosslinking degree of the crosslinking polyethylene reaches 74.2%;the tensile strength is 29.0 MPa and elongation at break is 480%;its melting temperature is 108.69 ℃.
Keywords:polyethylene  peroxide  crosslinking degree  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《包装工程》浏览原始摘要信息
点击此处可从《包装工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号