| 新型线性定标的物体光刀切口长度测量研究 |
| |
| 引用本文： | 吴小平,余艳梅,吴晓红,罗代升. 新型线性定标的物体光刀切口长度测量研究[J]. 激光与光电子学进展, 2010, 0(3) |
| |
| 作者姓名： | 吴小平 余艳梅 吴晓红 罗代升 |
| |
| 作者单位： | 四川大学电子信息学院图像信息研究所; |
| |
| 摘 要： | 基于激光三角法原理对三维物体光刀切口长度测量做了深入的研究,着重研究了测量原理和定标方法。采用坐标变换方法,分析了三维物体光刀切口长度测量在高度方向上和光刀方向上的物像关系,得出了三维物体光刀切口长度测量的计算公式。基于高度方向和光刀方向的物像关系提出了一种新型线性定标方法。进行了手指长度测量实验,测量结果精度较高。研究结果表明:高度方向上物体相对高度的倒数和像相对高度的倒数成线性关系;光刀方向上物像的长度比和物体的相对高度成线性关系;新的定标方法精度高,操作方便;光刀测量三维物体切口长度精度高、成本低、处理速度快。
|
| 关 键 词： | 测量 光刀切口长度测量 激光三角法 线性定标 光刀 |
Object Cut Length Measurement Using Light-Knife Based on New Linear Calibration |
| |
| Wu Xiaoping Yu Yanmei Wu Xiaohong Luo Daisheng. Object Cut Length Measurement Using Light-Knife Based on New Linear Calibration[J]. Laser & Optoelectronics Progress, 2010, 0(3) |
| |
| Authors: | Wu Xiaoping Yu Yanmei Wu Xiaohong Luo Daisheng |
| |
| Affiliation: | Image and Information Institute;School of Electronics and Information Engineering;Sichuan University;Chengdu;Sichuan 610064;China |
| |
| Abstract: | 3D object cut length measurement using light-knife is deeply researched based on laser triangulation,and the measurement principle and calibration method are studied in detail.The object-image relationships in height direction and light-knife direction are analyzed through coordinate transformation method,and the calculation formula of 3D object cut length measurement using light-knife is derived.A new linear calibration method is proposed based on the object-image relationships.An experiment of finger's le... |
| |
| Keywords: | measurement light-knife cut length measurement laser triangulation linear calibration light-knife |
| 本文献已被 CNKI 等数据库收录！ |
