| 用回路法分析自动模切机双肘杆机构 |
| |
| 引用本文： | 张选生,柴三中,成刚虎,李晋尧. 用回路法分析自动模切机双肘杆机构[J]. 包装工程, 2005, 26(6): 51-53,57 |
| |
| 作者姓名： | 张选生 柴三中 成刚虎 李晋尧 |
| |
| 作者单位： | 北京印刷学院,北京,102600;北京印刷学院,北京,102600;西安理工大学,西安,710048;西安理工大学,西安,710048 |
| |
| 摘 要： | 为了研究模切机的双肘杆机构的运动规律,根据回路法的基本原理,提出了用回路法分析复杂连杆机构运动规律的方法,描述了回路法的基本原理与实际应用.用回路法分析模切机的双肘杆机构,避免了对机构的拆分.基于回路法建立了模切机双肘杆施压机构的运动数学方程,并绘出了双肘杆机构部分构件位移、速度、加速度的运动曲线.
|
| 关 键 词： | 回路法 双肘杆机构 模切机 运动分析 |
| 文章编号： | 1001-3563（2005）06-0051-03 |
| 收稿时间： | 2005-08-29 |
| 修稿时间： | 2005-08-29 |
Motion analysis of the dual -elbow -bar mechanism of the die -cutting machine using the loop method |
| |
| ZHANG Xuan-sheng,CHAI San-zhong,CHENG Gang-hu,LI Jin-yao. Motion analysis of the dual -elbow -bar mechanism of the die -cutting machine using the loop method[J]. Packaging Engineering, 2005, 26(6): 51-53,57 |
| |
| Authors: | ZHANG Xuan-sheng CHAI San-zhong CHENG Gang-hu LI Jin-yao |
| |
| Abstract: | To research the motion law of the Dual - elbow - bar mechanism of die - cutting machine, according to the basic principle of loop method and its practical application , the loop method was mentioned to analyzed the motion of the complex linkage on the machine. The basic principle of loop method and its practical application was described. The motion of the dual - elbow - bar mechanism of the die - cutting machine was studied in total rather than researched each part respectively by separating the mechanism. Built up the sport mathematics equation of the elbow pole organization based on the loop method, and drew its displacement.velocity and acceleration exercise curve. |
| |
| Keywords: | loop method the dual - elbow - bar mechanism the die - cutting machine movement Analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
