首页 | 本学科首页   官方微博 | 高级检索  
     

微焦点X射线成像系统扫描参数测量及投影图像校正研究
引用本文:倪建平,李政,白宏涛,刘亚强,程建平,高文焕,康克军.微焦点X射线成像系统扫描参数测量及投影图像校正研究[J].核电子学与探测技术,2001,21(3):165-168.
作者姓名:倪建平  李政  白宏涛  刘亚强  程建平  高文焕  康克军
作者单位:清华大学工程物理系,
基金项目:国家自然科学基金资助项目(19705006)
摘    要:微焦点X射线成像系统由于被重新安装以及初始化,导致系统参数读数与实际值之间存在偏量。给出了测量这些偏量值的基本原理和方法,并通过实验求出偏量值。由于图像增强器与图像获取装置本身固有特点以及非线性获取成像,投影图像存在几何畸变。讨论了图像几何畸变校正的基本原理,并给出具体步骤以及校正后的图像.

关 键 词:微焦点X射线成像系统  扫描参数  空间畸变  测量  投影图像  校正
文章编号:0258-0934(2001)03-0165-04
修稿时间:2000年3月7日

Scanning parameter measurement and projected image correction for microfocus X-ray imaging system
NI Jian-ping,LI Zheng,BAI Hong-Tao,LIU Ya-qiang,CHENG Jian-ping,GAO Wen-huan,KANG Ke-jun.Scanning parameter measurement and projected image correction for microfocus X-ray imaging system[J].Nuclear Electronics & Detection Technology,2001,21(3):165-168.
Authors:NI Jian-ping  LI Zheng  BAI Hong-Tao  LIU Ya-qiang  CHENG Jian-ping  GAO Wen-huan  KANG Ke-jun
Abstract:Because of the reinstalling of microfocus X ray imaging system there will be certain deviation the inherent characteristics of the image intensifier and the image acquisition device, the acquired projected image is geometrical distorted, this debases the accuracy of the reconstructed image in three dimensional CT. The current paper dicusses the basic principle of how to solve the precise measurement and calculation of FOD, FDD, and the correction of the geometrical distortion of the projected image.
Keywords:microfocus X-ray imaging system  Scanning parameter  geometrical distortion
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号