首页 | 本学科首页   官方微博 | 高级检索  
     

奥氏体不锈钢表面硬质薄膜的制备与性能研究
引用本文:范文宾,李合琴,邵林飞.奥氏体不锈钢表面硬质薄膜的制备与性能研究[J].真空与低温,2009,15(4):227-232.
作者姓名:范文宾  李合琴  邵林飞
作者单位:合肥工业大学,材料科学与工程学院,安徽,合肥,230009
基金项目:安徽省红外与低温等离子体重点实验室,安徽省自然科学基金,973项目,国家自然科学基金 
摘    要:用磁控溅射法在奥氏体不锈钢基片上分别制备了TiN薄膜和Al2O3薄膜,并用XRD、SEM和显微硬度等测试手段对沉积态和退火态薄膜进行表征,分析了不同工艺参数对薄膜的沉积速率、结构和性能的影响,从而得到最佳工艺参数。TiN薄膜在沉积气压为1.5Pa,氩氮比为16:16时薄膜的硬度值最大为16.0GPa。Al2O3薄膜在沉积气压为0.5Pa,氩氧比为10:1时薄膜的硬度值可达25.2GPa。

关 键 词:奥氏体不锈钢  磁控溅射  氮化钛薄膜  氧化铝薄膜  显微硬度

PREPARINGS AND PROPERTIES OF HARD FILMS ON AUSTENITE STAINLESS STEEL
FAN Wen-bin,LI He-qi,SHAO Lin-fei.PREPARINGS AND PROPERTIES OF HARD FILMS ON AUSTENITE STAINLESS STEEL[J].Vacuum and Cryogenics,2009,15(4):227-232.
Authors:FAN Wen-bin  LI He-qi  SHAO Lin-fei
Affiliation:(School of Materials Science and Engineering,Hefei University of Technology,Hefei 230009,China)
Abstract:In this paper, the TiN film and Al2O3 film were prepared on austenitic stainless steel by magnetron sputtering method. These films were analyzed by XRD,SEM and Microhardness test. Through the analysis,the effects of different processes on the film deposition rate, strueture and properties are obtained, and the ideal parameters are given. The hardness of TiN thin film is 16.0 GPa when the deposition pressure is 1.5 Pa, and the ratio of argon to nitrogen is 16:16 . The hardness of Al2O3 thin film reaches 25.2 GPa when the deposition pressure is 0.5 Pa, and the ratio of argon to oxygen is 10:1.
Keywords:austenitic stainless steel  magnetron sputtering  TiN thin film  Al2O3 thin film  Microhardness
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号