| 用奥氏体焊条焊接9%Ni钢马氏体层组织及接头的断裂韧性 |
| |
| 引用本文： | 王智慧,王月琴.用奥氏体焊条焊接9%Ni钢马氏体层组织及接头的断裂韧性[J].北京工业大学学报,1992(3). |
| |
| 作者姓名： | 王智慧 王月琴 |
| |
| 作者单位： | 北京工业大学金属材料科学与工程学系
(王智慧)，北京工业大学金属材料科学与工程学系(王月琴) |
| |
| 摘 要： | 采用光学金相显微镜和透射电子显微镜分析了用奥氏体焊条OK69.45焊接的9％Ni钢接头熔合区和HAZ的组织;设计了特殊的试样测试了熔合区和HAZ过热区的断裂韧性COD值,并对断口进行了分析。结果表明:熔合区马氏体层的组织为板条状马氏体;熔合区的断裂韧性COD值与HAZ过热区COD值相差不大,马氏体层的存在并没有恶化接头的断裂韧性。
|
| 关 键 词： | 9％Ni钢 焊接 马氏体层 断裂韧性 |
The Affect of Martensite Laryer at Weld Bond On the Fracture Toughness of 9%Ni Steel Joints Welded by Austenitic Electrodes OK69.45 |
| |
| Wang Zhihui Wnag Yueqin.The Affect of Martensite Laryer at Weld Bond On the Fracture Toughness of 9%Ni Steel Joints Welded by Austenitic Electrodes OK69.45[J].Journal of Beijing Polytechnic University,1992(3). |
| |
| Authors: | Wang Zhihui Wnag Yueqin |
| |
| Affiliation: | Department of Metallic Materials Science and Engineering |
| |
| Abstract: | Optical microsope observarion and TEMA was used to study the microstructures at weld bond and HAZ of the 9%Ni steel joints welde by austenitic electrode-OK69.45.Special specimens were designed to measure the fracture toughness in the two regions during COD test,and the fractographic experiment was also made by SEM.The results shown that the structures in the martensite layer at weld bond is lath martensite,there is no significant difference in the COD valie between weld bond and over heated zone.The existence of martensite laryer does not reduce fractuer toughness value of the joints. |
| |
| Keywords: | 9%Ni Welding Martensite laryer fracture toughness |
| 本文献已被 CNKI 等数据库收录！ |
