首页 | 本学科首页   官方微博 | 高级检索  
     

化学法处理铜合金屑工艺的热力学和动力学分析
引用本文:陈维平,方三元,田丽. 化学法处理铜合金屑工艺的热力学和动力学分析[J]. 过程工程学报, 1994, 0(2)
作者姓名:陈维平  方三元  田丽
作者单位:湖南大学环境保护研究所!长沙,410082,湖南大学环境保护研究所!长沙,410082,湖南大学环境保护研究所!长沙,410082
摘    要:本文对化学法处理普通黄铜屑,直接制备纯铜粉末进行了热力学和动力学分析研究及试验表明:Zn,Fe等元素的酸浸反应容易进行,氧化及还原速度快.酸浸过程受扩散控制,其动力学方程为进一步的热力学分析指出,本工艺适合于处理各种铜合金尾料,尤其适合于黄铜类铜合金尾料。

关 键 词:废料  铜合金  粉末  热力学  动力学

THERMODYNAMIC AND KINETIC ANALYSIS OF CHEMICAL METHOD FOR TREATING SCRAPS OF COPPER ALLOYS
Chen Weiping, Fang Sanyuan and Tian Li. THERMODYNAMIC AND KINETIC ANALYSIS OF CHEMICAL METHOD FOR TREATING SCRAPS OF COPPER ALLOYS[J]. Chinese Journal of Process Engineering, 1994, 0(2)
Authors:Chen Weiping   Fang Sanyuan  Tian Li
Affiliation:Hunan University; Changsha 410082
Abstract:Thermodynamics and kinetics are studied for producing pure copper powder directly from the scraps of ordinary brass. The theoretical analysis and experimental results show that leaching of Zn, Fe, etc. from the alloy is easy, and the oxidation and reduction of the sponge copper resulted from leaching are fast reactions. Besides, the acid leaclling process is controlled by diffusion in the sponge copper, and the kinetic equation can be expressed as for scrap leaching with CHc1=20.2% Further thermodynahac analysis indicates that this process is also sllitable for scraps of all copper alloys, and particularly suited for industrial brass scraps.
Keywords:Scrap  Copper alloy   Powder   Thermodynamics   Kinetics
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号