| 网络化制造系统访问控制框架 |
| |
| 引用本文： | 刘婷婷,汪惠芬.网络化制造系统访问控制框架[J].计算机工程与应用,2007,43(19):227-230. |
| |
| 作者姓名： | 刘婷婷 汪惠芬 |
| |
| 作者单位： | 南京理工大学 机械工程学院，南京 210094 |
| |
| 摘 要： | 建立SDACM对象模型的基础上，提出一个网络化制造系统的访问控制框架，研究了访问控制框架的工作流程以及框架与系统其他安全部件的关系。基于该框架开发的网络化制造原型系统在某企业应用中表明该框架能够满足网络化制造系统需求。
|
| 关 键 词： | 访问控制 网络化制造系统 建模 |
| 文章编号： | 1002-8331（2007）19-0227-04 |
| 修稿时间： | 2007-03 |
Access control scheme for networked manufacturing system |
| |
| LIU Ting-ting,WANG Hui-fen.Access control scheme for networked manufacturing system[J].Computer Engineering and Applications,2007,43(19):227-230. |
| |
| Authors: | LIU Ting-ting WANG Hui-fen |
| |
| Affiliation: | Access control scheme for networked manufacturing system |
| |
| Abstract: | An access control scheme for networked manufacturing system is proposed based on SDACM.The relationship between the scheme and the whole system and relationship between the scheme and other security modules are considered to establish this scheme.The application result shows that the scheme can satisfy the networked manufacturing system. |
| |
| Keywords: | access control networked manufacturing system modeling |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《计算机工程与应用》浏览原始摘要信息 |
|
点击此处可从《计算机工程与应用》下载全文 |
