| 热轧润滑技术在H型钢生产中的应用 |
| |
| 引用本文： | 陆凤君,尹德全,冯伟,李振亮.热轧润滑技术在H型钢生产中的应用[J].山东冶金,2010,32(5):9-10,16. |
| |
| 作者姓名： | 陆凤君 尹德全 冯伟 李振亮 |
| |
| 作者单位： | [1]内蒙古科技大学,内蒙古包头014010 [2]山东工业职业学院,山东淄博256414 [3]莱芜钢铁集团有限公司,山东莱芜271104 |
| |
| 摘 要： | 莱钢在大型H型钢生产线精轧机组万能轧机上应用了润滑轧制技术,润滑喷射设备包括油箱、泵站、混合器、PLC、相配套的仪表仪器以及机内的基座和喷嘴,采用油水在管路中搅拌均匀后混喷到轧辊上的润滑给油方式。润滑液通过燃烧后的＂残炭＂、形成高温高压＂气垫＂及＂润滑膜＂的形式起润滑作用。应用表明,轧辊的磨损量减低了27%,H型钢的产量提高了24%,且表面质量明显改善。
|
| 关 键 词： | H型钢 润滑轧制 喷射设备 油水预搅拌 轧辊磨损 |
Application of Hot Rolling Lubrication Technology in H-beam Production |
| |
| LU Feng-jun,YIN De-quan,FENG Wei,LI Zhen-liang.Application of Hot Rolling Lubrication Technology in H-beam Production[J].Shandong Metallurgy,2010,32(5):9-10,16. |
| |
| Authors: | LU Feng-jun YIN De-quan FENG Wei LI Zhen-liang |
| |
| Affiliation: | 1 Inner Mongolia University of Science and Technology,Baotou 014010,China;2 Shandong Vocational College of Industry,Zibo 256414,China;3 Laiwu Iron and Steel Group Corporation,Laiwu 271104,China) |
| |
| Abstract: | Laiwu Steel applied lubrication-rolling technology in the universal mills of large H-beam production line finishing train.The lubricant system consisted of tank,pumping stations,mixer,PLC,relevant instrumentation equipment matched the base of the machine and nozzles.The oil lubrication manner was that the even mixture of oil and water being stirred in the pipe sprayed on the rolls.The lubricating was through three forms,that is,formed＂residual carbon＂after lubricant combustion,high temperature and pressure＂air cushion＂and the lubricating film.Applications showed that the roll wear rate was reduced by 27%,the output of the H-beam was increased by 24% and the surface quality was improved clearly. |
| |
| Keywords: | H-beam lubrication rolling spray equipment pre-mixing oil and water roll wear |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
