Methanol oxidation on carbon-supported Pt-Ru and TiO2 (Pt-Ru/TiO2/C) electrocatalyst prepared using polygonal barrel-sputtering method |
| |
| Authors: | Kazuki Hirakawa Takayuki Abe |
| |
| Affiliation: | a Hydrogen Isotope Research Center, University of Toyama, Gofuku 3190, Toyama 930-8555, Japan
b Department of Materials Science and Technology, Faculty of Engineering, Nagaoka University of Technology, Kamitomika 1603-1, Nagaoka, Niigata 940-2188, Japan |
| |
| Abstract: | Methanol oxidation performance of a carbon-supported Pt-Ru alloy catalyst used at the direct methanol fuel cell (DMFC) anode is improved by adding TiO2. However, the methanol oxidation performance of the electrocatalyst described above must be enhanced further to realize practical application in DMFCs. In this study, we used our original surface-modifying technique termed the “polygonal barrel-sputtering method” to prepare a carbon-supported Pt-Ru and TiO2 (Pt-Ru/TiO2/C) electrocatalyst offering higher methanol oxidation performance. The obtained results show that the methanol oxidation performance of the prepared Pt-Ru/TiO2/C is superior to that using wet process as the TiO2 deposition method. Furthermore, for our sputtering method, the peak current of methanol oxidation on the Pt-Ru/TiO2/C is enhanced by increasing the TiO2 deposited amount up to 2.8 wt.%. These results suggest that a Pt-Ru/TiO2 interface area is increased using the polygonal barrel-sputtering method, providing the high methanol oxidation performance of Pt-Ru/TiO2/C. |
| |
| Keywords: | Direct methanol fuel cells (DMFCs) Anode catalyst Methanol oxidation Polygonal barrel-sputtering method Pt-Ru/TiO2 interface |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
