| 催化剂对WO3基燃气敏感元件的影响 |
| |
| 引用本文： | 邓永和,曾庆丰,王冬青. 催化剂对WO3基燃气敏感元件的影响[J]. 电子元件与材料, 2007, 26(5): 31-32,35 |
| |
| 作者姓名： | 邓永和 曾庆丰 王冬青 |
| |
| 作者单位： | 湖南工程学院数理系,湖南,湘潭,411104;贵州大学理学院,贵州,贵阳,550003 |
| |
| 摘 要： | 在WO3粉体材料中加入催化剂(Pt,PtO2,Pd或PdCl2),于600℃烧结1 h制成旁热式厚膜可燃性气体敏感元件。采用静态电压测量法,研究了元件的加热功率与元件灵敏度(β)的关系以及催化剂对元件的响应–恢复时间的影响。结果表明:WO3基元件掺入质量分数为0.5%的催化剂,在加热功率为600 mW时,能提高元件的灵敏度2～10倍,元件的响应时间缩短63%～78%,恢复时间缩短84%～95%。。
|
| 关 键 词： | 电子技术 气体敏感元件 催化剂 灵敏度 响应—恢复时间 |
| 文章编号： | 1001-2028（2007）05-0031-02 |
| 修稿时间： | 2007-02-09 |
Effect of catalysts on WO3-based combustible gas sensor |
| |
| DENG Yong-he,ZENG Qing-feng,WANG Dong-qing. Effect of catalysts on WO3-based combustible gas sensor[J]. Electronic Components & Materials, 2007, 26(5): 31-32,35 |
| |
| Authors: | DENG Yong-he ZENG Qing-feng WANG Dong-qing |
| |
| Affiliation: | 1. Department of Mathematics and Physics, Hunan Institute of Engineering, Xiangtan 411104, China; 2. College of Science, Guizhou University, Guiyang 550003, China |
| |
| Abstract: | The thick film combustible gas sensor with indirectly heat was prepared by mixing catalysts(Pt,PtO2,Pd and PdCl2) into WO3 and sintering for one hour at 600 ℃.Based on the static voltage measure method,the relationship between the heat power and the sensitivity of sensor was researched.And the effects of catalysts on response and recovery time of sensor were also determined.The results show that the sensitivities of WO3-based combustible gas sensor are increased 2～10 times by doping 0.5 %(mass fraction) catalysts at 600 mW heat power.Response time and recovery time of sensor are decreased respectively 63 %~78 % and 84 %~95 %. |
| |
| Keywords: | electron technology gas sensor catalysts sensitivity response and recovery time |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
