Yielding of cement-treated marine clay |
| |
Affiliation: | 1. Department of Civil and Environmental Engineering, National University of Singapore, Singapore 117576, Singapore;2. Department of Civil Engineering, National University of Singapore, Singapore 117576, Singapore |
| |
Abstract: | This paper presents the findings of an experimental study on the primary yielding and post-yield behavior of cement-treated Singapore marine clay. The study was conducted using unconfined compression tests and triaxial tests. The results show that all the primary yield loci for the cement-treated marine clay have a consistent shape regardless of the mix ratio, curing stress or curing period. Three relationships are proposed for determining the size of the primary yield locus. The first two involve the direct determination of the isotropic primary yield stress, whereas the third makes use of the unconfined compressive strength. The first two relations are valid only for 7-day specimens. The third appears to have slightly larger scatter, but it is also applicable over a wider range of curing period and curing stress. Post-yield, over-consolidated samples were obtained by compressing specimens isotropically under effective stress levels higher than their isotropic primary yield stress and then allowing them to swell back to a lower effective confining stress prior to shearing. The normalized yield loci of these pre-yielded samples show a “collapse” from steep arches to more-rounded ellipses, while the yield loci expand with isotropic pre-compression pressure. |
| |
Keywords: | Cement-treated clay Primary yielding Yield locus Unconfined compressive strength Triaxial test Tension cut-off |
本文献已被 ScienceDirect 等数据库收录! |
|