| Study of fault injection system based on software |
| |
| 引用本文： | 仉立军 仉俊峰 洪炳镕. Study of fault injection system based on software[J]. 哈尔滨工业大学学报(英文版), 2007, 14(6): 761-764 |
| |
| 作者姓名： | 仉立军 仉俊峰 洪炳镕 |
| |
| 作者单位： | Harbin International Engineering Consulting Center，Dept. of Computer Science and Engineering Harbin Institute of Technology，Dept. of Computer Science and Engineering，Harbin Institute of Technology，Harbin 150018，China，Harbin 150001，China，Harbin 150001，China |
| |
| 基金项目： | National Defense Scientific Work Committee Foundation of China (Grant No.16.6.2.7). |
| |
| 摘 要： | A software fault injection system SFIS is designed,which consists of the target system plus a fault injector,fault library,workload,data collector,and data analyzer. A serial communication mechanism is adopted to simulate the factual work environment. Then a fault model is built for single particle event,which can be denoted as FM=(FL,FT). FL stands for fault location,and FT stands for fault type. The fault model supports three temporal faults: transient,intermittent,and permanent. During the experiments implemented by SFIS,the software interruption method is adopted to inject transient faults,and step trace method is adopted to inject permanent faults into the target system. The experiment results indicate that for the injected transient code segment faults,2.8 % of them do not affect the program output,80.1% of them are detected by the built-in error detection in the system,and 17.1% of them are not detected by fault detection mechanism. The experiment results verify the validity of the fault injection method.
|
| 关 键 词： | 软件错误注入 错误模型 注入器 工作量 |
| 文章编号： | 1005-9113（2007）06-0761-04 |
| 收稿时间： | 2005-05-20 |
Study of fault injection system based on software |
| |
| ZHANG Li-jun, ZHANG Jun-feng, HONG Bing-rong. Study of fault injection system based on software[J]. Journal of Harbin Institute of Technology (New Series), 2007, 14(6): 761-764 |
| |
| Authors: | ZHANG Li-jun ZHANG Jun-feng HONG Bing-rong |
| |
| Abstract: | A software fault injection system SFIS is designed,which consists of the target system plus a fault injector,fault library,workload,data collector,and data analyzer. A serial communication mechanism is adopted to simulate the factual work environment. Then a fault model is built for single particle event,which can be denoted as FM=(FL,FT). FL stands for fault location,and FT stands for fault type. The fault model supports three temporal faults: transient,intermittent,and permanent. During the experiments implemented by SFIS,the software interruption method is adopted to inject transient faults,and step trace method is adopted to inject permanent faults into the target system. The experiment results indicate that for the injected transient code segment faults,2.8 % of them do not affect the program output,80.1% of them are detected by the built-in error detection in the system,and 17.1% of them are not detected by fault detection mechanism. The experiment results verify the validity of the fault injection method. |
| |
| Keywords: | software fault injection fault model fault injector workload |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
