| 调质处理工艺对微合金化Q960E钢70 mm板组织性能的影响 |
| |
| 引用本文： | 成慧梅,冯俊鹏,孙电强,葛阳阳,王丽敏. 调质处理工艺对微合金化Q960E钢70 mm板组织性能的影响[J]. 特殊钢, 2022, 43(5): 78-81 |
| |
| 作者姓名： | 成慧梅 冯俊鹏 孙电强 葛阳阳 王丽敏 |
| |
| 作者单位： | 河钢股份有限公司邯郸分公司技术中心，邯郸 056000 |
| |
| 摘 要： | 采用890～920℃淬火和560～600℃回火工艺对Q960E钢70 mm板进行性能测试，并利用金相显微镜(OM)、扫描电镜(SEM)对Q960E钢板显微组织进行分析。结果表明：采用920℃淬火和560℃回火工艺的钢板强韧性匹配最优(UTS 1048 MPa, YS 1005 MPa, el.14%,-40℃KV2 52～61 J),钢板全厚度方向性能分布相对均匀，硬度值为27.5～33HRC;组织从表面至心部为回火索氏体和残余奥氏体。
|
| 关 键 词： | Q960E钢 70 mm板 调质 组织 性能 |
| 收稿时间： | 2022-04-22 |
Effect of Quenching-Tempering Process on Microstructure and Properties of Micro-Alloying Q960E Steel 70 mm Thickness Plate |
| |
| Cheng Huimei,Feng Junpeng,Sun Dianqiang,Ge Yangyang,Wang Limi. Effect of Quenching-Tempering Process on Microstructure and Properties of Micro-Alloying Q960E Steel 70 mm Thickness Plate[J]. Special Steel, 2022, 43(5): 78-81 |
| |
| Authors: | Cheng Huimei Feng Junpeng Sun Dianqiang Ge Yangyang Wang Limi |
| |
| Affiliation: | Hesteel Company Limited Handan Branch Technology Center, Handan 056000 |
| |
| Abstract: | The properties of Q960E steel 70 mm plate quenched at 890-920 °C and tempered at 560-600 °C are tested, and the microstructure of Q960E steel is analyzed by metallographic microscope (OM) and scanning electron microscope (SEM) . The results show that the strength toughness matching of the steel plate is the best when quenching at 920 ℃ and tempering at 560 °C (UTS 1 048 MPa,YS 1 005 MPa, e1.14% and -40 °C KV2 52-61 J), the performance distribution of the steel plate in the full thickness direction is relatively uniform, and the hardness value is 27.5-33HRC, the microstructure from the surface to the center is tempered sorbite and residual austenite. |
| |
| Keywords: | Q960E Steel 70 mm Thickness Plate Quenching-Tempering Microstructure Properties |
|
| 点击此处可从《特殊钢》浏览原始摘要信息 |
|
点击此处可从《特殊钢》下载免费的PDF全文 |
|
