首页 | 本学科首页   官方微博 | 高级检索  
     

20CrMnTiH钢中残余硼对末端淬透性的影响及工艺控制
引用本文:王芝林,何国宁,高建鹏,贾羽,赵海东.20CrMnTiH钢中残余硼对末端淬透性的影响及工艺控制[J].特殊钢,2022,43(2):40-43.
作者姓名:王芝林  何国宁  高建鹏  贾羽  赵海东
作者单位:1西宁特殊钢股份有限公司技术质最中心,西宁810005 ; 2北京科技大学新材料技术研究院,北京100083
摘    要:通过对特钢厂经110 t电弧炉+LF/VD精炼+连铸+热连轧工艺流程生产的400炉钢棒材的数据进行统计,利用末端淬透性实验(920±10)℃50 min后空冷至室温,随后(880±5)℃30 min水淬]和光谱分析获得了 20CrMnTiH系列钢的淬透性和化学成分,发现淬透性与残余硼元素存在线性关系.通过对各冶炼工序...

关 键 词:20CrMnTiH钢  末端淬透性    线性回归

Effect of Residual Boron on Jominy Hardenability of 20CrMnTiH Steel and Process Control
Wang Zhilin,He Guoning,Gao Jianpeng,Jia Yu,Zhao Haidong.Effect of Residual Boron on Jominy Hardenability of 20CrMnTiH Steel and Process Control[J].Special Steel,2022,43(2):40-43.
Authors:Wang Zhilin  He Guoning  Gao Jianpeng  Jia Yu  Zhao Haidong
Affiliation:1 Technology and Quality Centre, Xining Special Steel Co Ltd, Xining 810005; 2 Institute for Advanced & Materials and Technology,University of Science and Technology Beijing,Beijing 100083
Abstract:The experimental data of 400 heats of steel produced by 110 t EAF + LF/VD refining + continuous casting + hoi rolling in a special steel plant are statistically analyzed. The hardenability at (920 ± 10) °C for 50 min and then air cooling to room temperature,followed by holding at (880 ±5) °C for 30 min water quenching] and chemical composition of 20CrMnTiH steel are obtained by means of Jominy test and spectral analysis to get a linear relationship between the hardenability and the content of residual boron. By each steelmaking practice analysis it is found that the main source of B in steel is EAF tapping slag. The content of B in steel can be effectively controlled by controlling the amount of tapping slag in EAF tapping. In addition, when the amount of Al2O3 in the refining slag decreases from 30 % to 15% ~20% ,the content of B in steel can be controlled below 0. 000 2%.
Keywords:
点击此处可从《特殊钢》浏览原始摘要信息
点击此处可从《特殊钢》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号