催化重整生成油选择性加氢脱烯烃催化剂NiO/Al2O3的研究 |
| |
引用本文: | 张孔远,郭宇栋,郑运,刘晨光.催化重整生成油选择性加氢脱烯烃催化剂NiO/Al2O3的研究[J].石油炼制与化工,2022,53(5):14-20. |
| |
作者姓名: | 张孔远 郭宇栋 郑运 刘晨光 |
| |
作者单位: | 中国石油大学(华东)重质油国家重点实验室,CNPC催化重点实验室 |
| |
摘 要: | 以氢氧化铝干胶为原料,采用等体积浸渍法制备了NiO/Al2 O3催化剂;以溴指数为3836 mgBr/(100 g)的催化重整生成油评价NiO/Al2 O3催化剂的选择性加氢脱烯烃性能.考察了载体焙烧温度和NiO负载量对NiO/Al2 O3催化剂选择性加氢脱烯烃性能的影响.结果表明:载体焙烧温度为650℃时,采用NiO...
|
关 键 词: | 催化重整生成油 NiO/Al2O3 催化剂 选择性加氢 |
收稿时间: | 2021-07-19 |
修稿时间: | 2022-01-24 |
STUDY ON NiO/Al2O3 CATALYST FOR SELECTIVE HYDROGENATION OF OLEFINS IN REFORMATE |
| |
Abstract: | The NiO/Al2O3 catalyst was prepared by equal volume impregnation using aluminum hydroxide dry glue as the raw material, and the catalytic performance of NiO/Al2O3 catalyst for selective hydrogenation of alkenes was investigated by using reformmate withthe bromine index of 3 836 mgBr/(100 g) as the raw material. The effects of carrier calcination temperature and NiO loading on the performance of NiO/Al2O3 catalysts were investigated. The results show that when the carrier calcination temperature is 650 ℃, and the catalyst with 25% NiO loading (w) is used, under the conditions of a reaction pressure of 1.0 MPa, a volume space velocity of 8 h-1,a volume ratio of hydrogen to oil of 25:1 and a reaction temperature of 120 ℃, the oil bromine index is less than 100 mgBr/(100 g) , and the aromatics loss rate is less than 0.75%. |
| |
Keywords: | |
|
| 点击此处可从《石油炼制与化工》浏览原始摘要信息 |
|
点击此处可从《石油炼制与化工》下载全文 |
|