| 基于Gabor小波的磨床微进给电控装置的设计与研究 |
| |
| 引用本文： | 孙红光,潘毓学,顾海军,何大志. 基于Gabor小波的磨床微进给电控装置的设计与研究[J]. 机械设计与研究, 2005, 21(5): 49-51 |
| |
| 作者姓名： | 孙红光 潘毓学 顾海军 何大志 |
| |
| 作者单位： | 长春理工大学,机械工程学院,长春,130022;东北师范大学,计算机学院,长春,130024;长春理工大学,机械工程学院,长春,130022;吉林大学,通信工程学院,长春,130025 |
| |
| 基金项目： | 东北师范大学自然科学青年资金项目资助（111494021） |
| |
| 摘 要： | 设计了用于加工小口径非球面光学零件在磨床上实现脆性材料超精密磨削的微进给控制装置和基于Gabor小波的多通道滤波器。试验表明，在光学零件磨床上应用本装置对光学透镜进行磨削后，工作表面粗糙度可达Rα=0.02μm，能够满足小口径非球面光学零件精磨的技术指标要求。
|
| 关 键 词： | 超精密磨削 电控装置 Gabor小波 非球面 光学零件 |
| 文章编号： | 1006-2343(2005)05-049-02 |
| 收稿时间： | 2005-05-17 |
| 修稿时间： | 2005-05-17 |
Design and Study on Micro-feeding Electrical Control System Used for Grinding Machine Based on Gabor Wavelet |
| |
| SUN Hong-guang,PAN Yu-xue,GU Hai-jun,HE Dazhi. Design and Study on Micro-feeding Electrical Control System Used for Grinding Machine Based on Gabor Wavelet[J]. Machine Design and Research, 2005, 21(5): 49-51 |
| |
| Authors: | SUN Hong-guang PAN Yu-xue GU Hai-jun HE Dazhi |
| |
| Affiliation: | 1. College of Mechanical Engineering, Chang Chun University of Science and Technology, ChangChun 130022, China; 2. College of Computer, Northeast Normal University, ChangChun 130024, China; 3. College of communication engineering, Jilin University, ChangChun 130025, China |
| |
| Abstract: | An electrical control system and multi-channel filter based on Gabor wavelet is designed in order to implement super-precise grinding on brittle material and process small caliber inspherical optical parts. The surface roughness of the lens reaches Ra = 0.02~m after grinding with this system, which can meet the requirement of the surface roughness of common lens. |
| |
| Keywords: | super-precise grinding electrical control system Gabor wavelet inspherical optical parts |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
