| 磨削参数对陶瓷结合金刚石砂轮磨削硬质合金表面粗糙度的影响 |
| |
| 引用本文： | 宋鹏涛,刘泓,康露,刘跃华,陶洪亮. 磨削参数对陶瓷结合金刚石砂轮磨削硬质合金表面粗糙度的影响[J]. 工具技术, 2012, 46(2): 29-31 |
| |
| 作者姓名： | 宋鹏涛 刘泓 康露 刘跃华 陶洪亮 |
| |
| 作者单位： | 广东奔朗新材料股份有限公司 |
| |
| 摘 要： | 采用因素分析法,研究了不同条件下磨削参数的变化对陶瓷结合金刚石砂轮磨削硬质合金表面粗糙度的影响,分析了影响硬质合金表面加工质量的原因,并提出提高硬质合金表面加工质量的方法。
|
| 关 键 词： | 磨削参数 陶瓷金刚石砂轮 硬质合金 表面粗糙度 |
Influence of Grinding Parameters on Surface Roughness of Sintered-carbide in Grinding with Vitrified Bond Diamond Wheel |
| |
| Song Pengtao , Liu Hong , Kang Lu , Liu Yuehua , Tao Hongliang. Influence of Grinding Parameters on Surface Roughness of Sintered-carbide in Grinding with Vitrified Bond Diamond Wheel[J]. Tool Engineering(The Magazine for Cutting & Measuring Engineering), 2012, 46(2): 29-31 |
| |
| Authors: | Song Pengtao Liu Hong Kang Lu Liu Yuehua Tao Hongliang |
| |
| Affiliation: | Song Pengtao,Monte-Bianco Diamond Applications Co.,Ltd.,Foshan,Guangdong 528313,China,Liu Hong,Kang Lu,Liu Yuehua,Tao Hongliang |
| |
| Abstract: | Factor analysis method was used to analyze the influence of several grinding parameters on surface roughness of sintered-carbide in grinding with vitrified bond diamond wheel.Sintered-carbide surface quality and the reasons was discussed,and also the grinding parameters of improving the surface roughness was optimized. |
| |
| Keywords: | grinding additives vitrified bond diamond wheel sintered-carbide surface roughness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
