首页 | 本学科首页   官方微博 | 高级检索  
     

基于PCA相似系数与SVM的涡轮泵故障检测算法
引用本文:洪涛,李辉,邱畅啸,黄志奇. 基于PCA相似系数与SVM的涡轮泵故障检测算法[J]. 电子测量与仪器学报, 2012, 26(6): 514-520
作者姓名:洪涛  李辉  邱畅啸  黄志奇
作者单位:1. 电子科技大学空天科学技术研究院,成都,611731
2. 电子科技大学英才实验学院,成都,611731
3. 电子科技大学自动化工程学院,成都,611731
基金项目:载人航天预先研究计划资助项目
摘    要:提出了一种基于主元分析法(principal component analysis,PCA)相似系数与支持向量机(support vector machine,SVM)的故障检测算法用于液体火箭发动机涡轮泵试车后故障检测.该算法将历史信号按合理的步长分段,对信号段进行小波去噪预处理;再将每个步长信号平分为多段,采用主元...

关 键 词:涡轮泵  试车后故障检测  主元分析法  相似系数  支持向量机

Turbopump fault detection algorithm based on PCA similarity coefficients and SVM
Hong Tao , Li Hui , Qiu Changxiao , Huang Zhiqi. Turbopump fault detection algorithm based on PCA similarity coefficients and SVM[J]. Journal of Electronic Measurement and Instrument, 2012, 26(6): 514-520
Authors:Hong Tao    Li Hui    Qiu Changxiao    Huang Zhiqi
Affiliation:Hong Tao Li Hui Qiu Changxiao Huang Zhiqi (1. Institute of Astronautics and Aeronautics, University of Electronic Science and Technology of China, Chengdu 611731, China; 2. Yingcai Experiment School, University of Electronic Science and Technology of China, Chengdu 611731, China; 3. School of Automation, University of Electronic Science and Technology of China, Chengdu 611731, China)
Abstract:A fault detection algorithm based on principal component analysis (PCA) similarity coefficients and sup- port vector machine(SVM) was proposed for liquid rocket engine (LRE) turbopump fault detection after test run. Firstly the algorithm divides the historical signal into some segments by appropriate step, and does pretreatment of wavelet de- noising for each step. Secondly the algorithm divides every step of signal into some average segments, reduces the dimen- sion of every segment by PCA, chooses the first segment as basis, computes the similarity coefficient between the first segment and every other segment, uses all the similarity coefficients in the step to construct a vector as fault feature. Fi- nally the algorithm selects all the fault feature vectors of the historical signal to construct the SVM training sample set, obtains SVM classifier for fault detection of the test signal. A part of the vibration acceleration signal of a certain type of turbopump was chosen as the test object to validate the algorithm. The test results showed that for the test signals within 21.50s' duration, the algorithm detected the faults at 20.0076s without false alarm and missing alarm. The result was very close to the time that the faults really occurred(about 20.007s). The algorithm has good accuracy performance.
Keywords:turbopump   fault detection after test run   PCA   similarity coefficient   SVM
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号