| 机械式自动变速器同步过程的控制策略研究 |
| |
| 引用本文： | 罗元月,李钧浩,凌玲,吴百海. 机械式自动变速器同步过程的控制策略研究[J]. 机电工程技术, 2012, 41(8): 13-16,163 |
| |
| 作者姓名： | 罗元月 李钧浩 凌玲 吴百海 |
| |
| 作者单位： | 1. 韶关飞翔自动变速箱有限公司,广东韶关,512000
2. 广东工业大学机电工程学院,广东广州,510006 |
| |
| 基金项目： | 广东省教育部产学研结合重大项目（编号：2011A090200033） |
| |
| 摘 要： | 详细阐述锁环式同步器的工作原理,并分析机械式自动变速器同步过程的各个阶段的工作过程,基于离散化PID控制原理,提出同步过程三个阶段的相应控制策略,并采用冲击度作为评价标准.最后,通过台架试验验证提出的控制策略的可行性.试验数据表明,该控制策略可以在保证冲击度要求的前提下,满足所限定的同步时间,改善换档的平稳性与舒适性,减少同步环的磨损,增加同步器的使用寿命.
|
| 关 键 词： | 同步过程 AMT 锁环式同步器 离散PID 台架试验 |
Research on Control Strategy about Synchronous Process for Automatic Mechanical Transmission |
| |
| LUO Yuan-yue , LI Jun-hao , LING Ling , WU Bai-hai. Research on Control Strategy about Synchronous Process for Automatic Mechanical Transmission[J]. Mechanical & Electrical Engineering Technology, 2012, 41(8): 13-16,163 |
| |
| Authors: | LUO Yuan-yue LI Jun-hao LING Ling WU Bai-hai |
| |
| Affiliation: | 1.Shaoguan Future Auto Transmission Co.,Ltd.,Shaoguan 512000,China;2.Faculty of Electromechanical Engineering,Guangdong University of Technology,Guangzhou 510006,China) |
| |
| Abstract: | The working principle of lock ring synchronizer was expounded and the synchronous working process of automatic mechanical transmission（AMT） at each stage was analyzed in this paper.Based on the control principle of discrete PID,the corresponding control strategy to three stages was proposed.Then,the degree of jerk when starting of motor vehicle was used as an evaluation criterion.Finally,the bench tests were carried out to verify the feasibility of the proposed control strategy.The experimental results indicate that the control strategy can ensure the demand of jerk,meet the limited synchronous time,improve the smoothness and comfort of gear shift,reduce the wear of the synchronizing ring and increase the lifetime of synchronizer. |
| |
| Keywords: | synchronous process AMT lock ring synchronizer discrete PID bench test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
