|
|||||
|
|
| 流变模型对剪切稀化流体弹流油膜厚度影响的研究 | |
| 引用本文： | 刘剑平,张新义,贾庆轩,于春战. 流变模型对剪切稀化流体弹流油膜厚度影响的研究[J]. 中国机械工程, 2011, 22(20) |
| 作者姓名： | 刘剑平 张新义 贾庆轩 于春战 |
| 作者单位： | 1. 山东理工大学,淄博,255049／北京邮电大学,北京,100876 2. 山东理工大学,淄博,255049 3. 北京邮电大学,北京,100876 |
| 基金项目： | 山东省自然科学基金资助项目(ZR2011EEM008); 淄博市科技基金资助项目(2010110070) |
| 摘 要： | 基于Carreau流变模型和Ree—Eyring流变模型，对剪切稀化流体线接触弹流润滑进行了完全数值分析，得到了同一种润滑油在不同流变模型下的弹流油膜厚度。将理论分析得到的油膜厚度、经典弹流膜厚公式计算的油膜厚度以及实测的油膜厚度进行了对比，结果表明：基于Carreau流变模型的理论分析结果更能反映剪切稀化流体的实际弹流油膜厚度；在相同工况下，基于Ree—Eyring流变模型的理论分析结果低估了剪切稀化流体的油膜厚度，经典弹流膜厚公式过高地估计了剪切稀化流体的油膜厚度。研究结果表明：幂函数形式的流变模型更能反映剪切稀化流体的流变特性。 |
| 关 键 词： | Carreau流变模型 Ree—Eyring流变模型 剪切稀化流体 弹流油膜厚度 |
Effects of Rheological Model on Elastohydrodynamic Film Thickness for Shear-thinning Lubricants |
|
| Liu Jianping, Zhang Xinyi Jia Qingxuan Yu Chunzhan .Sh,ong University of Technology,Zibo,Sh,ong. Effects of Rheological Model on Elastohydrodynamic Film Thickness for Shear-thinning Lubricants[J]. China Mechanical Engineering, 2011, 22(20) | |
| Authors: | Liu Jianping Zhang Xinyi Jia Qingxuan Yu Chunzhan .Sh ong University of Technology Zibo Sh ong |
| Affiliation: | Liu Jianping1,2 Zhang Xinyi1 Jia Qingxuan2 Yu Chunzhan2 1.Shandong University of Technology,Zibo,Shandong,255049 2.Beijing University of Posts and Telecommunications,Beijing,100876 |
| Abstract: | Based on Carreau rheological model and Ree-Eyring rheological model,EHL simulation in line contact was presented for shear-thinning lubricants.Under the same operating condition EHL film thickness for the same lubricant based on different rheological models was obtained.Comparisons of EHL film thickness were conducted among simulation values and classical film thickness formulas values and experimental ones.The EHL film thickness based on Carreau rheological model matches with the published experimental res... |
| Keywords: | Carreau rheological model Ree-Eyring rheological model shear-thinning fluid elastohydrodynamic lubrication(EHL) film thickness |
| 本文献已被 CNKI 万方数据 等数据库收录！ | |