| 轴类零件大面积堆焊残余应力及组织性能分析 |
| |
| 引用本文： | 宋守许,赵吉儒,刘涛.轴类零件大面积堆焊残余应力及组织性能分析[J].中国机械工程,2011,22(18). |
| |
| 作者姓名： | 宋守许 赵吉儒 刘涛 |
| |
| 作者单位： | 合肥工业大学,合肥,230009 |
| |
| 基金项目： | 国家自然科学基金资助重点项目(50735006); “十一五”国家科技支撑计划项目(2008BAC46B01); 安徽省科技计划项目(08010202010); 国家自然科学基金资助项目(50905052) |
| |
| 摘 要： | 针对残余应力、组织成分对再制造堆焊层质量的影响，运用仿激光焊技术，采用H13CrMoA焊丝，在变速箱主动轴上整周堆焊不同厚度的焊层，用X射线残余应力分析仪测试堆焊层表面的残余应力，电解抛光堆焊层，分析堆焊层的应力梯度和界面应力，通过X射线能谱仪（EDS）分析堆焊层界面处成分分布，用扫描电镜（SEM）观测其组织形貌，结果表明：堆焊层表面峰值应力为拉应力，且随厚度的增加变化不大；沿垂直于单条焊缝中心线至轴心线方向所测的应力存在一定应力梯度，A0和A1界面处残余拉应力较大，A2界面处为较小残余拉应力；堆焊层界面处组织成分分布较均匀。
|
| 关 键 词： | 再制造 残余应力 应力梯度 组织性能 |
Analyses of Residual Stress and Microstructure Performance of Axles with Large Area Welded Surfacing Layers |
| |
| Song Shouxu Zhao Jiru Liu Tao Hefei University of Technology,Hefei.Analyses of Residual Stress and Microstructure Performance of Axles with Large Area Welded Surfacing Layers[J].China Mechanical Engineering,2011,22(18). |
| |
| Authors: | Song Shouxu Zhao Jiru Liu Tao Hefei University of Technology Hefei |
| |
| Affiliation: | Song Shouxu Zhao Jiru Liu Tao Hefei University of Technology,Hefei,230009 |
| |
| Abstract: | According to residual stress and component of organization work on clad layer,the different thicknessess welded surfacing layers were prepared on the axles of transmission with H13CrMoA weld wire by means of laser-pro welding technology.The residual stress of the surfacing layers was tested by XRD,the stress gradient and interfacial stress of the surfacing layers were measured by electropolishing and XRD,the composition distribution was tested by EDS between overlaying welding and matrix,and the microstruct... |
| |
| Keywords: | remanufacture residual stress stress gradient microstructure and property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
