| 圆锥破碎机虚拟样机参数化建模与仿真分析 |
| |
| 引用本文： | 岳双杰,范秀敏,马彦军,董钢.圆锥破碎机虚拟样机参数化建模与仿真分析[J].中国机械工程,2011,22(22). |
| |
| 作者姓名： | 岳双杰 范秀敏 马彦军 董钢 |
| |
| 作者单位： | 1. 上海交通大学,上海,200240
2. 上海交通大学,上海200240／机械系统与振动国家重点实验室,上海200240 |
| |
| 基金项目： | 高等学校博士学科点专项科研基金资助项目(20090073110038); 上海市科学技术委员会资助项目(09DZ1121302) |
| |
| 摘 要： | 为了在设计阶段提高破碎机机械结构运转性能和动力学表现，基于圆锥破碎机的主设计参数，结合ADAMS软件的建模语言，提出圆锥破碎机虚拟样机参数化建模的方法，该方法通过参数化类型和约束类型表达模型元素之间的关联关系。由仿真分析参数化模型得到不同工况的动锥自转转速信息以及关键运动副的动力学信息，为其工作性能评价提供依据并为下一步的有限元分析提供数据支持。以PYG1100型圆锥破碎机为例进行参数化建模和仿真结果分析，验证了模型的有效性和可靠性。
|
| 关 键 词： | 圆锥破碎机 参数化建模 虚拟样机 仿真分析 |
Virtual Prototype Parameterized Modeling and Simulation Analysis of Cone Crusher |
| |
| Yue Shuangjie Fan Xiumin, Ma Yanjun Dong Gang.Virtual Prototype Parameterized Modeling and Simulation Analysis of Cone Crusher[J].China Mechanical Engineering,2011,22(22). |
| |
| Authors: | Yue Shuangjie Fan Xiumin Ma Yanjun Dong Gang |
| |
| Affiliation: | Yue Shuangjie1 Fan Xiumin1,2 Ma Yanjun1 Dong Gang1 1.Shanghai Jiaotong University,Shanghai,200240 2.State Key Laboratory of Mechanical System and Vibration,200240 |
| |
| Abstract: | In order to improve mechanical structure operational performance and dynamic performance of crusher in the design stage,a method of cone crusher virtual prototype parameterized modeling was proposed which was based on the main parameter of cone crusher and combined with ADAMS modeling language.Expressing relationship between elements by parameterized types and constraint types,a general parameterized model was simulated to obtain mantle rotation speed information and key moving pairs' kinetic information un... |
| |
| Keywords: | cone crusher parameterized modeling virtual prototype simulation analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
