| 基于电热激发的主动拆卸产品设计方法及其设计准则研究 |
| |
| 引用本文： | 刘志峰,成焕波,李新宇,赵流现,张洪潮.基于电热激发的主动拆卸产品设计方法及其设计准则研究[J].中国机械工程,2011,22(19). |
| |
| 作者姓名： | 刘志峰 成焕波 李新宇 赵流现 张洪潮 |
| |
| 作者单位： | 1. 合肥工业大学,合肥,230009
2. 合肥工业大学,合肥230009／德克萨斯理工大学,德克萨斯79409 |
| |
| 基金项目： | 国家自然科学基金资助项目(50775064);国家自然科学基金资助重点项目(50735006); “十一五”国家科技支撑计划项目(2008BAC46B01) |
| |
| 摘 要： | 首先提出了基于电热激发的主动拆卸方法、多级主动拆卸方法及其设计准则,结合实际案例分析,说明了基于电热激发的主动拆卸产品的一般设计方法;将有限元分析结果与实验结果、电热激发实验与传统的热激发实验进行对比,验证了电热激发方法的可行性,并将这些方法及其设计准则用于产品的主动拆卸设计,明显提高了产品的拆卸效率。
|
| 关 键 词： | 主动拆卸 电热激发 多级主动拆卸 设计准则 |
Research on Design Method of Active Disassembly Products and Design Criterion Based on Electro and Heat Stimulation |
| |
| Liu Zhifeng Cheng Huanbo Li Xinyu Zhao Liuxian Zhang Hongchao, .Hefei University of Technology,Hefei, .Texas Technology University,Texas.Research on Design Method of Active Disassembly Products and Design Criterion Based on Electro and Heat Stimulation[J].China Mechanical Engineering,2011,22(19). |
| |
| Authors: | Liu Zhifeng Cheng Huanbo Li Xinyu Zhao Liuxian Zhang Hongchao Hefei University of Technology Hefei Texas Technology University Texas |
| |
| Affiliation: | Liu Zhifeng1 Cheng Huanbo1 Li Xinyu1 Zhao Liuxian1 Zhang Hongchao1,2 1.Hefei University of Technology,Hefei,230009 2.Texas Technology University,Texas,79409 |
| |
| Abstract: | The paper put forward to active disassembly,multi-step active disassembly methods and design criteria based on electro and heat stimulation.General design method of active disassembly product based on electro and heat stimulation was explained through the case analysis.Finite element analysis results are compared with experimental ones,electro and heat stimulation experiments were compared with the traditional heat stimulation experiments,and then the feasibility of method was proved.Active disassembly meth... |
| |
| Keywords: | active disassembly electro and heat stimulation multi-step active disassembly design criterion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
