| 铆接过程中进给速度对轮毂轴承性能的影响 |
| |
| 引用本文： | 程琼,赵文礼,林辉,孟庆华. 铆接过程中进给速度对轮毂轴承性能的影响[J]. 机械, 2014, 0(3): 56-59,73 |
| |
| 作者姓名： | 程琼 赵文礼 林辉 孟庆华 |
| |
| 作者单位： | 杭州电子科技大学机械工程学院,浙江杭州310018 |
| |
| 摘 要： | 第三代轮毂轴承单元在加工过程中普遍使用铆接加工方法,铆接时的进给速度会对轮毂轴承的性能带来很大影响。通过试验方法测得不同的进给速度下铆接对芯轴的塑性变形而产生的应变,计算出因为变形而引起的卡紧力大小和内圈的压缩量,再利用ANSYS Workbench进行有限元仿真,分析由于变形对轮毂轴承性能的影响,从而可以得到合适的进给速度,为加工过程中控制铆头的进给速度提供参考。
|
| 关 键 词： | 轮毂轴承 铆接 塑性形变 ANSYS Workbench |
The effect of the feed speed in the process of riveting on the performance of the wheel hub bearing |
| |
| CHENG Qiong,ZHAO Wen-li,LIN Hui,MENG Qing-hua. The effect of the feed speed in the process of riveting on the performance of the wheel hub bearing[J]. Machinery, 2014, 0(3): 56-59,73 |
| |
| Authors: | CHENG Qiong ZHAO Wen-li LIN Hui MENG Qing-hua |
| |
| Affiliation: | ( School of Mechanical Engineering, Hangzhou Dianzi University, Hangzhou 310018, China ) |
| |
| Abstract: | This paper is focused on optimization of riveting process of the third generation of hub bearing. Different clamping forces and reductions of inner circle within different feed speeds of the rivet point, caused by plastic deformation of axle, were measured. Then performances of the hub bearing under different feed speeds were simulated in the ANSYS Workbench so as to provide suggestion for control of feed speed. |
| |
| Keywords: | wheel hub bearing riveting process plastic deformation Ansys Workbench |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
