首页 | 本学科首页   官方微博 | 高级检索  
     

三氧化二铬-聚苯乙烯单层复合靶丸的制备
引用本文:蔡佩君,张林,唐永建,冯长根. 三氧化二铬-聚苯乙烯单层复合靶丸的制备[J]. 原子能科学技术, 2004, 38(3): 279-282
作者姓名:蔡佩君  张林  唐永建  冯长根
作者单位:1. 徐州师范大学,化学系,江苏,徐州,221009;中国工程物理研究院,激光聚变研究中心,四川,绵阳,621900
2. 中国工程物理研究院,激光聚变研究中心,四川,绵阳,621900
3. 北京理工大学,机电工程学院,北京,100081
基金项目:国家自然科学基金(重点基金19989501),中国工程物理研究院科研基金(20020869)
摘    要:在聚苯乙烯(PS)中掺杂金属元素可为微球打靶过程提供诊断信息。以Cr2O3-PS复合材料为原料,采用微封装法通过两步乳化制备出掺杂Cr2O3的PS复合靶丸,Cr2O3在球壳内掺杂均匀,表面粗糙度低于30nm。

关 键 词:三氧化二铬 聚苯乙烯 靶丸制备 惯性约束聚变 成球性能 抗辐射性能
文章编号:1000-6931(2004)03-0279-04

Preparation of Polystyrene-chromium Oxide Composite Thin Pellets
CAI Pei-jun. Preparation of Polystyrene-chromium Oxide Composite Thin Pellets[J]. Atomic Energy Science and Technology, 2004, 38(3): 279-282
Authors:CAI Pei-jun
Affiliation:CAI Pei-jun~
Abstract:The polystyrene pellets doped with Cr_2O_3, made by emulsion technique wereprepared. Three different solutions including two water and one oil phases were used forthis process. The W_1 phase (water) was mixed with the O phase (3% Cr_2O_3-PS solu-tion, benzene and dichloromethane mixture as the solvent) to form W_1/O emulsion.The W_1/O phase was poured into 5% PVA aqueous under stirring. Then this processfollowed with other post--treating means: washing and drying. Parameters of the typicalCr_2O_3-PS hollow shells fit the requirement of ICF experiments.
Keywords:chromium oxide  polystyrene  pellet  preparation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号