| 单件加工中位置度误差的公差圆图解分析法 |
| |
| 引用本文： | 吴天凤. 单件加工中位置度误差的公差圆图解分析法[J]. 煤矿机械, 2003, 0(7): 51-53 |
| |
| 作者姓名： | 吴天凤 |
| |
| 作者单位： | 安徽理工大学,安徽,淮南,232001 |
| |
| 摘 要： | 从位置度公差定义出发 ,推出不用确定位置度误差圆圆心位置 ,直接用公差圆包容诸测点来判定位置度检测是否合格的图解分析法。通过该方法对箱体上 10个孔的位置度进行分析 ,证明该方法是简便有效的
|
| 关 键 词： | 位置度误差 相关 图解法 |
| 文章编号： | 1003-0794(2003)07-0051-03 |
| 修稿时间： | 2003-04-15 |
A graphic analytical method using tolerance circle to analyze the positional alignment error in the single piece maching |
| |
| WU Tian feng. A graphic analytical method using tolerance circle to analyze the positional alignment error in the single piece maching[J]. Coal Mine Machinery, 2003, 0(7): 51-53 |
| |
| Authors: | WU Tian feng |
| |
| Abstract: | A graphic analytical method is present in this paper,which can determine if the positional alignment measurment is eligible by determining if the tolerance circle can contain all the measuring point.This method needn't ensure the center of the positional alignment error circle.This method is simple and effective which is proved by using this method to analyze the positional alignment of ten holes on the box. |
| |
| Keywords: | positional alignment correlation graphic method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
