首页 | 本学科首页   官方微博 | 高级检索  
     

底吹电弧炉熔池混合过程的模拟研究
引用本文:李宝宽,赫冀成.底吹电弧炉熔池混合过程的模拟研究[J].金属学报,1996,32(5):495-501.
作者姓名:李宝宽  赫冀成
作者单位:东北大学
摘    要:实验测量了电弧炉底部单喷嘴和多喷嘴喷吹的熔池水模型中混合时间和若干断面流场、混合时间随喷嘴直径、数量、位置及示踪剂投放点变化的函数关系。通过数值法求解了熔池流场及其混合过程。结果表明,仅靠增加喷嘴直径来改进熔池搅拌效果不显著。偏心、深熔池处布置的多喷嘴喷吹的流场混合能力较强,原因是这样布置使熔池流场具有较强烈的圆周方向对流并能获得更多的搅拌功率。

关 键 词:底吹电弧炉  混合过程  模拟  炼钢  电弧炉  溶池
收稿时间:1996-05-18
修稿时间:1996-05-18

NUMERICAL COMPUTATION OF MIXING PROCESSES IN BATH OF BOTTOM STIRRING ELECTRIC ARC FURNACE
LI Baokuan,HE Jicheng.NUMERICAL COMPUTATION OF MIXING PROCESSES IN BATH OF BOTTOM STIRRING ELECTRIC ARC FURNACE[J].Acta Metallurgica Sinica,1996,32(5):495-501.
Authors:LI Baokuan  HE Jicheng
Abstract:The flow field and the mixing time in the water model of the bath of bottom stirring electric arc furnace(EAF) for single-and multi-plug are numerically and experimentally studied. The mixing time is the function of the diameter, number, location of plugs and the tracer injection situation. It was shown that the variation of mixing time is not obvious with the increasing of plug diameter, the stirring efficiency is better if plug number is increased and plugs are distributed in deep and off-central region in vessel, since the angular velocities occur and the more stirring power is obtained in these layouts.
Keywords:bottom stirring electric are furnace  mixing time  numerical computation  
本文献已被 CNKI 维普 等数据库收录!
点击此处可从《金属学报》浏览原始摘要信息
点击此处可从《金属学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号